Surface modification effects on film growth with atmospheric Ar/Ar+O2 plasma

被引：18

作者：

Chung, YM ^{[1
]}

Jung, MJ ^{[1
]}

Lee, MW ^{[1
]}

Han, JG ^{[1
]}

机构：

[1] Sungkyunkwan Univ, Ctr Adv Plasma Surface Technol, Suwon, South Korea

来源：

SURFACE & COATINGS TECHNOLOGY | 2003年 / 174卷

关键词：

atmospheric RF plasma; surface modification; PVC; interface; Ti film;

D O I：

10.1016/S0257-8972(03)00362-1

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Commercial, purified PVC films were surface-modified by Ar and mixed Ar + O-2 RF plasma at atmospheric pressure. The change of surface properties was monitored by contact angle measurements. Both modifications cause surface oxidation of PVC films, which is connected with the formation of functional groups enhancing polymer wettability. This process is very fast and efficient in mixed Ar + O-2 RF plasma but relatively slower during PVC exposure to Ar. The interface reactions of sputtered Ti with PVC have been studied using high resolution X-ray diffractometer and X-ray photoelectron spectroscopy. The reactions of Ti with PVC lead to the simultaneous formation of TiCL2, TiC and Ti-oxide. (C) 2003 Elsevier Science B.V. All rights reserved.

引用

页码：1038 / 1042

页数：5

共 50 条

[11] Studies on the Surface of PTFE Membranes Treated with Atmospheric Pressure Low Temperature Plasma of Ar and Ar/H2
Akashi, Naohisa
Hosoi, Katsuhiko
Kuroda, Shin-ichi
[J]. ADVANCES IN TEXTILE ENGINEERING AND MATERIALS IV, 2014, 1048 : 440 - 443
[12] NBR surface modification by Ar plasma and its tribological properties
Segu, Dawit Zenebe
[J]. INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2016, 68 (02) : 227 - 232
[13] Microsecond pulse driven Ar/CF4 plasma jet for polymethylmethacrylate surface modification at atmospheric pressure
Wang, Ruixue
Zhang, Cheng
Liu, Xiong
Xie, Qing
Yan, Ping
Shao, Tao
[J]. APPLIED SURFACE SCIENCE, 2015, 328 : 509 - 515
[14] Atmospheric RF plasma effects on the film adhesion property
Chung, YM
Jung, MJ
Han, JG
Lee, MW
Kim, YM
[J]. THIN SOLID FILMS, 2004, 447 : 354 - 358
[15] Optimizing the Surface Modification of Poly( tetrafluoroethylene ) in a Flowing Afterglow Ar Plasma
Liu Hong-Xia
Chen Jie-Rong
[J]. CHEMICAL JOURNAL OF CHINESE UNIVERSITIES-CHINESE, 2009, 30 (06): : 1199 - 1204
[16] Study of Radio Frequency Plasma Treatment of PVDF Film Using Ar, O2 and (Ar + O2) Gases for Improved Polypyrrole Adhesion
Kaynak, Akif
Mehmood, Tariq
Dai, Xiujuan J.
Magniez, Kevin
Kouzani, Abbas
[J]. MATERIALS, 2013, 6 (08): : 3482 - 3493
[17] Surface modification of PET films by a combination of vinylphthalimide deposition and Ar plasma irradiation
Inagaki, N
Narushima, K
Yokoi, A
[J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2004, 18 (13) : 1517 - 1528
[18] Surface modification and degradation of poly(lactic acid) films by Ar-plasma
Inagaki, N
Narushima, K
Tsutsui, Y
Ohyama, Y
[J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2002, 16 (08) : 1041 - 1054
[19] Continuous modification treatment of polyester fabric by Ar-O2 (10:1) discharge at atmospheric pressure
Department of Basic Science, Jining Medical College, 38 South Jianshe Road, Jining, Shandong 272013, China
不详
[J]. J. Ind. Text., 2007, 1 (43-53): : 43 - 53
[20] Enhancing the NO sensing properties of the SnO2 nanowires sensors by Ar-O2 plasma modification
Xu, T. T.
Liu, Y. Y.
Jiang, Z. M.
Pei, Y. Y.
Zhang, S.
Xu, J. M.
Zhang, X. L.
Li, X. J.
[J]. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2018, 29 (16) : 13897 - 13902

← 1 2 3 4 5 →