Experimental investigation of the fatigue crack growth behavior in wire arc additively manufactured ER100S-1 steel specimens

被引：23

作者：

Ermakova, Anna ^{[1
]}

Ganguly, Supriyo ^{[2
]}

Razavi, Nima ^{[3
]}

Berto, Filippo ^{[3
]}

Mehmanparast, Ali ^{[1
]}

机构：

[1] Cranfield Univ, Offshore Renewable Energy Engn Ctr, Cranfield MK43 0AL, Beds, England

[2] Cranfield Univ, Welding Engn & Laser Proc Ctr, Cranfield, Beds, England

[3] Norwegian Univ Sci & Technol NTNU, Dept Mech & Ind Engn, Trondheim, Norway

来源：

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | 2022年 / 45卷 / 02期

基金：

英国工程与自然科学研究理事会;

关键词：

additive materials; fatigue crack growth; structural integrity; WIND MONOPILE WELDMENTS; RESIDUAL-STRESS; CHALLENGES; FRACTURE; METALS;

D O I：

10.1111/ffe.13598

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Wire arc additive manufacturing (WAAM) is an advanced fabrication technology for the rapid and efficient production of large-scale engineering structures. In order to design WAAM components for a given loading condition, it is essential to characterize the mechanical and failure behavior of the parts. In this study, the performance of ER100S-1 low carbon steel has been investigated by performing fatigue crack growth tests on compact tension specimens extracted from a WAAM built wall. The experimental results have been compared with the recommended trends in the BS7910 standard and with data available in the literature. Metallurgical investigations have been carried out to explore the microstructural effects on the fatigue behavior of the WAAM built components. The specimen location and orientation effects were comprehensively examined, and the results are discussed in terms of the influence of macroscopic and microscopic deformation on the overall response of the WAAM built components under fatigue loading conditions.

引用

页码：371 / 385

页数：15

共 43 条

[31] Experimental investigation of mechanical and fracture properties of offshore wind monopile weldments: SLIC interlaboratory test results [J].

Mehmanparast, A. ;

Taylor, J. ;

Brennan, F. ;

Tavares, I. .

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 41 (12) :2485-2501

[32] Fatigue crack growth rates for offshore wind monopile weldments in air and seawater: SLIC inter-laboratory test results [J].

Mehmanparast, Ali ;

Brennan, Feargal ;

Tavares, Isaac .

MATERIALS & DESIGN, 2017, 114 :494-504

[33]

Raeisi S, 2019, ADDITIVE MANUFACTURI, P7, DOI [DOI 10.1016/B978-0-12-814062-8.00002-9, 10.1016/B978-0-12-814062-8.00002-9]

[34] Laser metal deposition for powder metallurgy parts [J].

Selcuk, C. .

POWDER METALLURGY, 2011, 54 (02) :94-99

[35] Relationship between manufacturing defects and fatigue properties of additive manufactured austenitic stainless steel [J].

Smith, Thale R. ;

Sugar, Joshua D. ;

Schoenung, Julie M. ;

San Marchi, Chris .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 765

[36] Challenges associated with the wire arc additive manufacturing (WAAM) of aluminum alloys [J].

Thapliyal, Shivraman .

MATERIALS RESEARCH EXPRESS, 2019, 6 (11)

[37] Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: Application to additive manufacturing [J].

Wang, Zhuqing ;

Stoica, Alexandru D. ;

Ma, Dong ;

Beese, Allison M. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 707 :585-592

[38]

Williams, 2017, 29 ICAF S NAG, P7

[39] A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement [J].

Wu, Bintao ;

Pan, Zengxi ;

Ding, Donghong ;

Cuiuri, Dominic ;

Li, Huijun ;

Xu, Jing ;

Norrish, John .

JOURNAL OF MANUFACTURING PROCESSES, 2018, 35 :127-139

[40] Forming appearance analysis in multi-layer single-pass GMAW-based additive manufacturing [J].

Xiong, Jun ;

Zhang, Guangjun ;

Zhang, Weihua .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 80 (9-12) :1767-1776

← 1 2 3 4 5 →