The influence of process parameters on the impact resistance of 3D printed PLA specimens under water-absorption and heat-treated conditions

Purpose The purpose of this paper is to analyse the effect of water absorption and heat treatment on the impact strength of three-dimensional (3D) printed Izod specimens. A low-cost post-processing technique is proposed to improve the impact strength of 3D printed parts substantially. Design/methodology/approach In the present work, the effect of water absorption and the heat-treatment on the impact resistance of 3D printed poly-lactic acid parts possessing different layer-height, build-orientation and raster-orientation was studied. Water absorption tests were conducted in distilled water and it was observed that the water- absorption in specimens follows the Fickian diffusion mechanism. A set of specimens was heat-treated at 120 degrees C for 1 h using an induction furnace. Post water absorption and heat-treatment a significant increase in the impact resistance is noticed and especially a steep increase in impact resistance is observed in heat-treated specimens. Findings Experimental findings show that raster orientation played a major role in the impact resistance of a 3D printed structure in comparison to other process parameters. The order of influence of process parameters on the impact strength of specimens was disclosed by the mean effect plots. In terms of processing time and cost, the post-processing heat-treatment approach was found to be convenient compared to the water absorption technique. Originality/value This paper presents a new set of low-cost post-processing techniques (water-absorption and heat-treatment) for improving the impact strength of 3D printed specimens.