An experimental research on energy efficiency of a beverage cooler with the latent heat storage

被引:23
作者
Maderic, Damir [1 ]
Pavkovic, Branimir [2 ]
Lenic, Kristian [2 ]
机构
[1] Univ North, Mech Engn Dept, 104 Brigade 3, Varazhdin 42000, Croatia
[2] Univ Rijeka, Fac Engn, Vukovarska 58, Rijeka 51000, Croatia
关键词
Beverage cooler; Refrigeration system; Energy saving; Ice bank; Energy efficiency; REFRIGERATED DISPLAY CABINET; PHASE-CHANGE MATERIALS; SOLIDIFICATION; CONSUMPTION; PCM;
D O I
10.1016/j.applthermaleng.2018.11.026
中图分类号
O414.1 [热力学];
学科分类号
摘要
The experimental study has been performed on a beverage cooler with latent heat storage, on the unit which can be considered as representative for the whole market of similar equipment. Studies of the energy efficiency of such a refrigeration equipment were not previously performed due to a lack of interest in present relations between customers and suppliers, which makes the presented study original and a good starting point for further research. Experimental study focused on energy consumption and energy efficiency measures concerning a control system of beverage coolers with latent heat storage (ice bank). Results show that replacement of a thermostat with an ice bank relay as a control device can provide two main benefits: up to 15% reduction of energy consumption and significant decrease of refrigeration system start-ups what can extend service life of compressor. An analysis of intermittent mode of operation of the agitator (mixer) integrated into the latent heat storage was investigated resulting in up to 55% reduction of energy consumption in stand-by mode and 17% reduction during the refrigeration system operation. Optimization of ice bank mass could give additional reduction in energy consumption, but it requires additional research on dynamic behaviour of the cold storage.
引用
收藏
页码:270 / 277
页数:8
相关论文
共 19 条
[1]   The novel use of phase change materials in a refrigerated display cabinet: An experimental investigation [J].
Alzuwaid, F. ;
Ge, Y. T. ;
Tassou, S. A. ;
Raeisi, A. ;
Gowreesunker, L. .
APPLIED THERMAL ENGINEERING, 2015, 75 :770-778
[2]   The novel use of phase change materials in an open type refrigerated display cabinet: A theoretical investigation [J].
Alzuwaid, F. A. ;
Ge, Y. T. ;
Tassou, S. A. ;
Sun, J. .
APPLIED ENERGY, 2016, 180 :76-85
[3]  
[Anonymous], 32022003 ANSIASHRAE
[4]   Performance improvement and energy consumption reduction in refrigeration systems using phase change material (PCM) [J].
Bista, Subhanjan ;
Hosseini, Seyed Ehsan ;
Owens, Evan ;
Phillips, Garrison .
APPLIED THERMAL ENGINEERING, 2018, 142 :723-735
[5]   Mapping the energy consumption of household refrigerators by varying the refrigerant charge and the expansion restriction [J].
Boeng, Joel ;
Melo, Claudio .
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2014, 41 :37-44
[6]  
Buyruk E, 2009, J SCI IND RES INDIA, V68, P122
[7]   A novel household refrigerator with shape-stabilized PCM (Phase Change Material) heat storage condensers: An experimental investigation [J].
Cheng, Wen-Long ;
Mei, Bao-Jun ;
Liu, Yi-Ning ;
Huang, Yong-Hua ;
Yuan, Xu-Dong .
ENERGY, 2011, 36 (10) :5797-5804
[8]   Testing and modelling of a variable speed scroll compressor [J].
Cuevas, Cristian ;
Lebrun, Jean .
APPLIED THERMAL ENGINEERING, 2009, 29 (2-3) :469-478
[9]   A numerical study, on the usage of phase change material (PCM) to prolong compressor off period in a beverage cooler [J].
Ezan, Mehmet Akif ;
Doganay, Esra Ozcan ;
Yavuz, Fazil Erinc ;
Tavman, Ismail Hakki .
ENERGY CONVERSION AND MANAGEMENT, 2017, 142 :95-106
[10]   Numerical investigation of effect of the position of the cylinder on solidification in a rectangular cavity [J].
Fertelli, Ahmet ;
Gunhan, Gokhan ;
Buyruk, Ertan .
HEAT AND MASS TRANSFER, 2017, 53 (02) :687-704