Mechanical response of zirconium -: II.: Experimental and finite element analysis of bent beams

In a companion paper [Acta mater. 2001, 49(15), 3085-3096] we develop a polycrystal constitutive law that incorporates the deformation mechanisms operating in high purity zirconium (Zr) at liquid nitrogen (LN) and room temperature (RT). In this paper we present results of 4-point bending tests performed on beams of highly textured zirconium. These tests have been performed at LN and RT, in two orthogonal bending planes, and up to a strain of approximately 20% in the outermost fibers of the beams. A novel experimental technique, dot-matrix deposition and mapping (DMDM), has been developed and employed to analyze the distribution of local plastic strain and macroscopic deformation in the deformed beams, Automated electron backscatter diffraction (EBSD) pattern analysis has been used to evaluate the textures just below the outermost tensile and compressive surfaces and at the neutral plane. Experimental results compare very well with the predictions of finite element (FE) simulations obtained using the constitutive law developed in Part I. Specifically, we compare local deformation, macroscopic deformation and local texture in the beam. We show that the contribution of twinning to deformation results in different qualitative responses in the compressive and tensile fibers of the bent beam. Our results indicate the necessity of using a constitutive description that accounts for the anisotropy of the aggregate and for its evolution with deformation. Published by Elsevier Science Ltd on behalf of Acta Materialia Inc.