Vibration parameters identification of turbomachinery rotor blades under transient condition using Blade Tip-Timing measurements

被引:35
作者
Bornassi, S. [1 ]
Berruti, T. M. [1 ]
Firrone, C. M. [1 ]
Battiato, G. [1 ]
机构
[1] Politecn Torino, Dipartimento Ingn Meccan & Aerosp, Corso Duca Abruzzi 24, I-10129 Turin, Italy
关键词
Transient resonance passage; Linear sweep rate; Vibration parameters identification; Tip-Timing method; Strain gauge; POWER-PLANTS; AMPLITUDE; PASSAGE;
D O I
10.1016/j.measurement.2021.109861
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
During run ups and run downs, the rotating blades are subjected to fluctuating forces with time dependent frequencies and the dynamic response of the blades around the resonance crossings deviates from the stationary response. This paper presents a procedure to identify the vibration parameters of rotating blades under this non-stationary condition. An analytically based solution of a single degree of freedom (SDOF) system exposed to a transient harmonic excitation with linear time varying frequency is used for parameters identification. This analytical model is fitted into the Blade Tip-Timing (BTT) data and the vibration parameters are determined by a least square optimization technique. A numerical simulator based on a lumped parameter model of the bladed disk assembly is employed to demonstrate the method performance. Afterwards, the accuracy of the method is proved by testing it on the experimental data acquired by BTT and strain gauges on a rotating bladed disk.
引用
收藏
页数:15
相关论文
共 37 条
[1]   A reduced-order model for transient analysis of bladed disk forced response [J].
Ayers, J. P. ;
Feiner, D. M. ;
Griffin, J. H. .
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2006, 128 (03) :466-473
[2]   Forced response of rotating bladed disks: Blade Tip-Timing measurements [J].
Battiato, G. ;
Firrone, C. M. ;
Berruti, T. M. .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2017, 85 :912-926
[3]  
Bonhage Marius, 2015, Proceedings in Applied Mathematics and Mechanics, V15, P47, DOI 10.1002/pamm.201510014
[4]   Transient amplitude amplification of mistuned structures: An experimental validation [J].
Bonhage, Marius ;
Adler, Jan Thore ;
Kolhoff, Christoph ;
Hentschel, Olaf ;
Schlesier, Klaus-Dieter ;
Panning-von Scheidt, Lars ;
Wallaschek, Joerg .
JOURNAL OF SOUND AND VIBRATION, 2018, 436 :236-252
[5]  
Bonhage M, 2012, PROCEEDINGS OF THE ASME TURBO EXPO 2012, VOL 7, PTS A AND B, P1227
[6]   Vibration Parameters Estimation by Blade Tip-Timing in Mistuned Bladed Disks in Presence of Close Resonances [J].
Bornassi, Saeed ;
Firrone, Christian Maria ;
Berruti, Teresa Maria .
APPLIED SCIENCES-BASEL, 2020, 10 (17)
[7]   Blade synchronous vibration measurements of a new upgraded heavy duty gas turbine MGT-70(3) by using tip-timing method [J].
Bornassi, Saeed ;
Ghalandari, Mohammad ;
Maghrebi, Saeed Faghfoor .
MECHANICS RESEARCH COMMUNICATIONS, 2020, 104
[8]  
Carassale L., 2015, TURBO EXPO POWER LAN, V56772
[9]  
Carassale L., 2016, TURBO EXPO POWER LAN, V49835
[10]   Wavelet-based identification of rotor blades in passage-through-resonance tests [J].
Carassale, Luigi ;
Marre-Brunenghi, Michela ;
Patrone, Stefano .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2018, 98 :124-138