Examination of wear properties of Al/B4C composites reinforced with irregularly shaped B4C

被引：1
作者：
Topcu, Ismail [1 ]
机构：
[1] Alanya Alaaddin Keykubat Univ, Dept Met & Mat Engn, Antalya, Turkey
来源：
JOURNAL OF CERAMIC PROCESSING RESEARCH | 2021年 / 22卷 / 03期
关键词：
B4C; Mechanical properties; Sintering; Wear; POWDER-METALLURGY; MECHANICAL-PROPERTIES; BEHAVIOR; MICROSTRUCTURE; OPTIMIZATION; PARAMETERS;
D O I：
10.36410/jcpr.2021.22.3.276
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this study, Boroncarbide (B4C) powders were added as supplemental material to produce aluminum (Al) metal matrix composites (MMC) by mechanical alloying (MA) method. Three different B4C amount (5, 7,5, and 10 wt%) were used and three different temperatures (600, 620, and 640 degrees C) were applied for the sintering of the samples. Wear rate, hardness, and density of the produced composites were evaluated in order to investigate the effect of different B4C content and sintering temperatures. It was found that the increase in the B4C amount decreased the wear rate and density of the specimens while increasing the hardness. Moreover, the application of different temperatures had a positive effect on the density, hardness, and wear behavior of the specimens.
引用
收藏
页码：276 / 282
页数：7
相关论文
共 30 条
[1]   Structure of Mechanically Milled CNT-Reinforced Al-Alloy Nanocomposites [J].
Al-Aqeeli, Nasser ;
Abdullahi, Kachalla ;
Suryanarayana, C. ;
Laoui, Tahar ;
Nouari, Saheb .
MATERIALS AND MANUFACTURING PROCESSES, 2013, 28 (09) :984-990
[2]  
An JW, 2002, J CERAM PROCESS RES, V3, P118
[3]   Processing of silicon carbide-boron carbide-aluminium composites [J].
Arslan, Gursoy ;
Kalemtas, Ayse .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (03) :473-480
[4]   Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites [J].
Baradeswaran, A. ;
Vettivel, S. C. ;
Perumal, A. Elaya ;
Selvakumar, N. ;
Issac, R. Franklin .
MATERIALS & DESIGN, 2014, 63 :620-632
[5]   Friction and wear behavior of Al-CNT composites [J].
Bastwros, Mina M. H. ;
Esawi, Amal M. K. ;
Wifi, Abdalla .
WEAR, 2013, 307 (1-2) :164-173
[6]   Microstructure and Abrasive Wear Behavior of CuSn10-Graphite Composites Produced by Powder Metallurgy [J].
Canakci, A. ;
Cuvalci, H. ;
Varol, T. ;
Erdemir, F. ;
Ozkaya, S. ;
Yalcin, E. D. .
POWDER METALLURGY AND METAL CERAMICS, 2014, 53 (5-6) :275-287
[7]   Synthesis of novel CuSn10-graphite nanocomposite powders by mechanical alloying [J].
Canakci, A. ;
Varol, T. ;
Cuvalci, H. ;
Erdemir, F. ;
Ozkaya, S. ;
Yalcin, E. D. .
MICRO & NANO LETTERS, 2014, 9 (02) :109-112
[8]   Influence of codeposited Al2O3 and h/BN on tribological properties of Ni-Al2O3-h/BN composite coatings [J].
Choi, Jin-Hyuk ;
Gyawali, Gobinda ;
Dhakal, Dhani Ram ;
Humam, Sami Bin ;
Joshi, Bhupendra ;
Lee, Soo Wohn .
JOURNAL OF CERAMIC PROCESSING RESEARCH, 2020, 21 (02) :249-255
[9]  
Eren A, 2015, ARCHITECTURE GAZI U, V30, P214
[10]  
German R.M, 2005, SINTERING SCI, V38, P522
123