Creep and fracture behavior of as-cast Mg-11Y-5Gd-2Zn-0.5Zr (wt%)

被引:21
作者
Yin, D. D. [1 ]
Wang, Q. D. [1 ,2 ]
Boehlert, C. J. [3 ]
Ding, W. J. [1 ,2 ]
机构
[1] Shanghai Jiao Tong Univ, Sch Mat Sci & Engn, Natl Engn Res Ctr Light Alloy Net Forming, Shanghai 200240, Peoples R China
[2] Shanghai Jiao Tong Univ, Sch Mat Sci & Engn, State Key Lab Met Matrix Composites, Shanghai 200240, Peoples R China
[3] Michigan State Univ, Dept Chem Engn & Mat Sci, E Lansing, MI 48824 USA
基金
中国国家自然科学基金;
关键词
MG-ZN ALLOYS; MAGNESIUM ALLOYS; MONKMAN-GRANT; DEFORMATION MECHANISMS; ELEVATED-TEMPERATURES; TENSILE PROPERTIES; HCP METALS; MICROSTRUCTURE; RESISTANT; ZR;
D O I
10.1007/s10853-012-6546-4
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The tensile-creep and creep-fracture behavior of as-cast Mg-11Y-5Gd-2Zn-0.5Zr (wt%) (WGZ1152) was investigated at temperatures between 523 and 598 K (0.58-0.66T (m)) and stresses between 30 and 140 MPa. The creep stress exponent was close to five, suggesting that dislocation creep was the dominant creep mechanism. The activation energy for creep (233 +/- A 18 kJ/mol) was higher than that for self-diffusion in magnesium, and was believed to be associated with cross-slip, which was the dominant thermally-aided creep mechanism. This was consistent with the surface observations, which suggested non-basal slip and cross-slip were active at 573 K. The minimum creep rate and fracture time values fit the original and modified Monkman-Grant models. In situ creep experiments highlighted the intergranular cracking evolution. The creep properties and behavior were compared with those for other high-temperature creep-resistant Mg alloys such as WE54-T6 and HZ32-T5.
引用
收藏
页码:6263 / 6275
页数:13
相关论文
共 50 条
[1]  
Aghion E, 2003, JOM-J MIN MET MAT S, V55, pA30
[2]   Creep properties of Mg-Gd-Y-Zr alloys [J].
Anyanwu, IA ;
Kamado, S ;
Kojima, Y .
MATERIALS TRANSACTIONS, 2001, 42 (07) :1212-1218
[3]  
Ashby M. F., 1984, Advances in Fracture Research (Fracture 84). Proceedings of the 6th International Conference on Fracture (ICG6), P3
[4]   The tensile and creep behavior of Mg-Zn Alloys with and without Y and Zr as ternary elements [J].
Boehlert, C. J. .
JOURNAL OF MATERIALS SCIENCE, 2007, 42 (10) :3675-3684
[5]   In situ scanning electron microscopy observations of tensile deformation in a boron-modified Ti-6Al-4V alloy [J].
Boehlert, C. J. ;
Cowen, C. J. ;
Tamirisakandala, S. ;
McEldowney, D. J. ;
Miracle, D. B. .
SCRIPTA MATERIALIA, 2006, 55 (05) :465-468
[6]   The microstructure, tensile properties, and creep behavior of Mg-Zn alloys containing 0-4.4 wt.% Zn [J].
Boehlert, CJ ;
Knittel, K .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 417 (1-2) :315-321
[7]   Thermal properties of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) alloy [J].
Chen, C. J. ;
Wang, Q. D. ;
Yin, D. D. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 487 (1-2) :560-563
[8]   CAVITY GROWTH ON A SLIDING GRAIN-BOUNDARY [J].
CHEN, IW .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1983, 14 (11) :2289-2293
[9]  
Dieter G.E., 1986, MECH METALLURGY, P751
[10]  
Dobes F., 1976, Metal Science, V10, P382