Enhance the figure of merit for flexible thermoelectric materials by reducing the screening effect

A flexible thermoelectric materials (FTEM) films based on Polydimethylsiloxane as the polymer matrix and (Zinc Oxide, Polyaniline and multi wall Carbon nanotube) as the fillers were prepared. The fillers were prepared using modified sol-gel method to enhance the distribution of the nanoparticles inside the polymer matrix and good performance. The Seebeck coefficient, electrical conductivity, thermal conductivity and dielectric measurements were carried out for all of the four films. The Seebeck coefficient results for the investigated films were -40, 220, -120, 280 mu v/k degrees at 200 degrees C for FTEM 1, 2, 3, 4 alternatively. The sign and the value for the Seebeck measurements show a great dependent on the filler type add to the film. The electrical conductivity results for the films was varied from 2 9 10(-8) to 0.14 S/m and strongly dependent on the fillers electrical conductivity. The less dependent on the thermal conductivity of the fillers and a slight change in the thermal conductivity value of the films were obtained. The figure of merit for the films was ranged from 1.14 x 10(-16) to 3.134 x 10(-8). The dielectric results ranged from 4 to 3500. Reducing the screening effect will increase the electrical conductivity and Seebeck coefficient values.