Some Analytical Results on Transmission Errors in Narrow-Faced Spur and Helical Gears: Influence of Profile Modifications

被引：75

作者：

Velex, P. ^{[1
]}

Bruyere, J. ^{[1
]}

Houser, D. R. ^{[2
]}

机构：

[1] Univ Lyon, CNRS, UMR 5259, INSA Lyon,LaMCoS, F-69621 Villeurbanne, France

[2] Ohio State Univ, Dept Mech Engn, Gear & Power Transmiss Res Lab, Columbus, OH 43210 USA

来源：

JOURNAL OF MECHANICAL DESIGN | 2011年 / 133卷 / 03期

关键词：

gear; transmission error; profile relief; modifications; analytical results; CONTACT-RATIO; RELIEF; LOAD; SYSTEMS; DESIGN; MODEL;

D O I：

10.1115/1.4003578

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Some theoretical developments are presented, which lead to approximate analytical results on quasi-static transmission errors valid for low and high contact ratio spur and helical gears. Based on a multidegree-of-freedom gear model, a unique scalar equation for transmission error is established. The role of profile relief is analyzed by using Fourier series and it is shown that transmission error fluctuations depend on a very limited number of parameters representative of gear geometry and profile relief definition. An original direct solution to the optimum relief minimizing transmission error fluctuations is presented, which is believed to be helpful for designers. The analytical results compare well with the numerical results provided by a variety of models and it is demonstrated that some general laws of evolution for transmission error fluctuations versus profile modifications can be established for spur and helical gears. [DOI: 10.1115/1.4003578]

引用

页数：11

共 34 条

[1]

AJMI M, 2002, VDI P INT C GEAR MUN, V2, P737

[2] Static and dynamic tooth loading in spur and helical geared systems-experiments and model validation [J].

Baud, S ;

Velex, P .

JOURNAL OF MECHANICAL DESIGN, 2002, 124 (02) :334-346

[3] MATHEMATICAL PROGRAMMING METHOD FOR DESIGN OF ELASTIC BODIES IN CONTACT [J].

CONRY, TF ;

SEIREG, A .

JOURNAL OF APPLIED MECHANICS, 1971, 38 (02) :387-&

[4] MATHEMATICAL PROGRAMMING TECHNIQUE FOR EVALUATION OF LOAD DISTRIBUTION AND OPTIMAL MODIFICATIONS FOR GEAR SYSTEMS [J].

CONRY, TF ;

SEIREG, A .

JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1973, 95 (04) :1115-1122

[5]

Gregory R.W., 1963, Proceedings of the Institution of Mechanical Engineers, V178, P207, DOI [10.1177/002034836317800130, DOI 10.1177/002034836317800130]

[6]

HOUSER DR, 2000, P 8 ASME INT POW TRA

[7]

HOUSER DR, 1996, P 7 ASME INT POW TRA, P365

[8]

HOUSER DR, 1991, DUDLEYS GEAR HDB, pCH14

[9] Effect of involute tip relief on dynamic response of spur gear pairs [J].