Surface analysis of the injection molded magnesium alloy using GD-OES

被引：3

作者：

Nakatsugawa, I ^{[1
]}

Araki, K

Takayasu, H

Saito, K

Matsusaka, K

Endou, T

Shida, A

机构：

[1] Japan Steel Works Ltd, Magnesium Proc Equipment & Prod Div, Hiroshima 7368602, Japan

[2] Hiroshima Kokusai Gakuin Univ, Fac Engn, Hiroshima 7390321, Japan

[3] Yokohama City Ctr Ind Technol & Design, Yokohama, Kanagawa 2630004, Japan

来源：

SURFACE & COATINGS TECHNOLOGY | 2003年 / 169卷

关键词：

Glow Discharge Optical Emission Spectroscopy; GD-OES; surface structure; magnesium alloy; mold lubricant; chemical cleaning;

D O I：

10.1016/S0257-8972(03)00119-1

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Glow Discharge Optical Emission Spectroscopy (GD-OES) was applied to analyze the surface structure of injection-molded AZ91D magnesium alloy products. The thickness of surface layer containing mold lubricant is approximately 300 nm. H and C elements are good indicators for monitoring the presence of mold lubricant. A chemical cleaning system based on acid etching, desmutting and neutralizing steps can provide the magnesium surface free from mold lubricant. (C) 2003 Elsevier Science B.V. All rights reserved.

引用

页码：307 / 310

页数：4

共 50 条

[41] In situ analysis of magnesium alloy using a standoff and double-pulse laser-induced breakdown spectroscopy system
Xin, Yong
Sun, Lan-Xiang
Yang, Zhi-Jia
Zeng, Peng
Cong, Zhi-Bo
Qi, Li-Feng
[J]. FRONTIERS OF PHYSICS, 2016, 11 (05)
[42] In situ analysis of magnesium alloy using a standoff and double-pulse laser-induced breakdown spectroscopy system
Yong Xin
Lan-Xiang Sun
Zhi-Jia Yang
Peng Zeng
Zhi-Bo Cong
Li-Feng Qi
[J]. Frontiers of Physics, 2016, 11
[43] Measurement of Heat Transfer Coefficient of Magnesium Alloy and Temperature Change of Roll using Heat Transfer Solidification Analysis Method
Han, Chang-Suk
Lee, Chan-Woo
[J]. KOREAN JOURNAL OF MATERIALS RESEARCH, 2022, 32 (09): : 391 - 395
[44] A novel in situ deposition of hydroxyapatite nanoplates using anodization/hydrothermal process onto magnesium alloy surface towards third generation biomaterials
Mousa, Hamouda M.
Tiwari, Arjun Prasad
Kim, Jinwoo
Adhikari, Surya Prasad
Park, Chan Hee
Kim, Cheol Sang
[J]. MATERIALS LETTERS, 2016, 164 : 144 - 147
[45] EVOLUTIONARY OPTIMIZATION OF WIRE EDM PROCESS FOR THE SURFACE FINISH ON A MAGNESIUM AZ91D ALLOY USING AN ANN AND A GENETIC ALGORITHM
Pradeepkumar, Madhesan
Jesudas, Thangaraj
Sasikumar, Chandrasekaran
Narasimharajan, Mani
[J]. MATERIALI IN TEHNOLOGIJE, 2024, 58 (05): : 663 - 669
[46] Analysis of microstructure, treatment pattern, and corrosion behaviour of AZ91D magnesium alloy processed by selective laser surface remelting
Lin, Pengyu
Guo, Yunting
Zhang, Zhihui
Wang, Qing
Kang, Zhongxiong
Yang, Hongxiu
Ren, Luquan
[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 21 : 1293 - 1306
[47] Optimisation of laser surface ablation of alumina/GO coating on AZ31D magnesium alloy using Cuckoo Search Algorithm method
Patil, Sashikumargouda
Bharatish, A.
Harish, D. V. N.
Patel, Md Saad
Babu, Satheesh
Solaiachari, Sivakumar
[J]. ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2024,
[48] Optimization of tribology parameters of AZ91D magnesium alloy in dry sliding condition using response surface methodology and genetic algorithm
Beniyel, M.
Sivapragash, M.
Vettivel, S. C.
Kumar, P. Senthil
Kumar, K. K. Ajith
Niranjan, K.
[J]. BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2021, 69 (01)
[49] Multi response optimization of EDM process parameters for biodegradable AZ31 magnesium alloy using TOPSIS and grey relational analysis
M Somasundaram
J Pradeep Kumar
[J]. Sādhanā, 47
[50] Multi response optimization of EDM process parameters for biodegradable AZ31 magnesium alloy using TOPSIS and grey relational analysis
Somasundaram, M.
Kumar, J. Pradeep
[J]. SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2022, 47 (03):

← 1 2 3 4 5 →