Reliability assessment of Sn-Pb and Pb-free solder joints under the cyclic bend and shear tests

被引：0
作者：
Chen, Y. S. [1 ]
Wang, C. S. [1 ]
Fan, C. T. [1 ]
Chang, K. C. [2 ]
Pu, H. P. [2 ]
机构：
[1] Yuan Ze Univ, Dept Mech Engn, 135 Yuan Tung Rd, Chungli 320, Taiwan
[2] Taiwan Semicond Mfg Co Ltd, Hsinchu 30077, Taiwan
来源：
ICEPT: 2007 8TH INTERNATIONAL CONFERENCE ON ELECTRONICS PACKAGING TECHNOLOGY, PROCEEDINGS | 2007年
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The study conducts the reliability test of the flip chip ball grid array (FCBGA) components with both the cyclic bend tests and shear tests for three types of solder materials: the eutectic solder with compositions of Sn63Pb37, and the lead free solder with compositions of both SnAg3.0Cu0.5 and SnAg4.0Cu0.5. The final results for the cycles to failure data of different solder ball materials are plotted with the Weibull plots. It shows that the slope of the Weibull plot for the eutectic solder material is larger than that of the lead free solder materials with compositions of SnAg3.0Cu0.5 and SnAg4.0Cu0.5. This indicates that the lead free solder materials have much variation in the failed cycles during the cyclic test. It is noteworthy that the FCBGA components with SnAg3.0Cu0.5 solder have the best durability both in the cyclic bend and shear tests. Moreover, the failure mode analysis is utilized to observe the failure locations for the test component under the cyclic bend and shear tests. It is observed that the failure of the FCBGA component are either at the interface between bulk solder and the package side metal, or between the bulk solder and the printed circuit board side metal.
引用
收藏
页码：768 / +
页数：2
相关论文
共 50 条
[41]   Mechanical properties of Pb-free SnAg solder joints [J].
Keller, J. ;
Baither, D. ;
Wilke, U. ;
Schmitz, G. .
ACTA MATERIALIA, 2011, 59 (07) :2731-2741
[42]   Thermomechanical Fatigue Analysis of Pb-free Solder Joints [J].
Wang, Yuzhong ;
guan, Liangwei .
2020 21ST INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2020,
[43]   The effects of creep on electromigration behaviors in Sn-based Pb-free solder joints [J].
Zuo, Yong ;
Ma, Limin ;
Wan, Ting ;
Qiao, Lei ;
Liu, Sihan ;
Guo, Fu .
2013 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2013, :784-788
[44]   The Effect of Wetting Gravity Regime on Shear Strength of SAC and Sn-Pb Solder Lap Joints [J].
Sona, Mrunali ;
Prabhu, K. Narayan .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (09) :4177-4187
[45]   The Effect of Wetting Gravity Regime on Shear Strength of SAC and Sn-Pb Solder Lap Joints [J].
Mrunali Sona ;
K. Narayan Prabhu .
Journal of Materials Engineering and Performance, 2017, 26 :4177-4187
[46]   Reliability issues in Pb-free solder joint miniaturization [J].
Zhiheng Huang ;
Paul P. Conway ;
Erik Jung ;
Rachel C. Thomson ;
Changqing Liu ;
Thomas Loeher ;
Mathias Minkus .
Journal of Electronic Materials, 2006, 35 :1761-1772
[47]   Reliability issues in Pb-free solder joint miniaturization [J].
Huang, Zhiheng ;
Conway, Paul P. ;
Jung, Erik ;
Thomson, Rachel C. ;
Liu, Changqing ;
Loeher, Thomas ;
Minkus, Mathias .
JOURNAL OF ELECTRONIC MATERIALS, 2006, 35 (09) :1761-1772
[48]   The State of Pb-free Solder - A Joint Reliability Overview [J].
Vasudevan, Vasu ;
Schulz, Tanner ;
Pei, Min ;
Toth, F. ;
Lucero, A. E. ;
Zhou, Bite ;
Mukherjee, Sibasish .
2016 IEEE INTERNATIONAL RELIABILITY PHYSICS SYMPOSIUM (IRPS), 2016,
[49]   Six cases of reliability study of Pb-free solder joints in electronic packaging technology [J].
Zeng, K ;
Tu, KN .
MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2002, 38 (02) :55-105
[50]   A study of crack propagation in Pb-free solder joints under drop impact [J].
Caers, J. F. J. M. ;
Wong, E. H. ;
Seah, S. K. W. ;
Zhao, X. J. ;
Selvanayagam, C. S. ;
van Driel, W. D. ;
Owens, N. ;
Leoni, M. ;
Tan, L. C. ;
Eu, P. L. ;
Lai, Yi-Shao ;
Yeh, Chang-Lin .
58TH ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, PROCEEDINGS, 2008, :1166-+
12345