Quantitative evaluation of thermal performance and energy saving potential of the building integrated with PCM in a subarctic climate

被引:51
|
作者
Kenzhekhanov, Sultan [1 ]
Memon, Shazim Ali [1 ]
Adilkhanova, Indira [1 ]
机构
[1] Nazarbayev Univ, Dept Civil & Environm Engn, Sch Engn & Digital Sci, Nur Sultan 010000, Kazakhstan
关键词
Phase change materials; Thermal performance; Maximum temperature reduction; Discomfort hour; Energy saving potential; PHASE-CHANGE MATERIALS; NUMERICAL-SIMULATION; COMFORT; REDUCTION; OPTIMIZATION; SYSTEM;
D O I
10.1016/j.energy.2019.116607
中图分类号
O414.1 [热力学];
学科分类号
摘要
This research quantitatively investigates the thermal performance and energy efficiency of the residential building integrated with nine PCMs (PCM19 to PCM27) in different cities of subarctic climate (Dfc according to Koppen-Geiger climate classification). The thermal performance was evaluated by using the concept of average temperature fluctuation reduction (ATFR), maximum temperature reduction (MTR) and discomfort hours. ATFR allowed estimating the monthly PCM performance and determining the periods where it worked the best. MTR was used to quantitatively estimate the effect of PCM on maximum air temperature reduction during different seasons (swing and summer) while the concept of discomfort hours was used to investigate the effect of PCM on human thermal comfort. Thereafter, the concept of annual energy savings was used to evaluate the possibility of using a few PCMs for the whole Dfc climate zone. Finally, economic and environmental analyses were performed to evaluate the utility of PCMs in the subarctic climate. The results showed that the residential building integrated with PCM demonstrated better performance in terms of ATFR, especially during the warm season. Based on maximum temperature reduction results, PCMs with low melting temperatures were optimum during swing season, whereas PCMs with high melting temperatures were optimum in the summer period. According to the energy analysis results, the annual energy savings for the subarctic climate were up to 10000 kWh. It was confirmed that few optimum PCMs (PCM23 and PCM24) can be used for the whole subarctic climate to enhance the energy efficiency of the building. Finally, from the economic analysis, the payback period varied from 16 to 32 years while from environmental analysis, the annual CO2 savings up to 4817 kg were obtained. Conclusively, PCMs can significantly improve the thermal and energy performance of the buildings in the Dfc region. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页数:18
相关论文
共 50 条
  • [1] Quantitative evaluation of the thermal and energy performance of the PCM integrated building in the subtropical climate zone for current and future climate scenario
    Nurlybekova, Gauhar
    Memon, Shazim Ali
    Adilkhanova, Indira
    ENERGY, 2021, 219
  • [2] Thermal performance and energy saving using phase change materials (PCM) integrated in building walls
    Anter, Ayman G.
    Sultan, Ahmed A.
    Hegazi, A. A.
    El Bouz, M. A.
    JOURNAL OF ENERGY STORAGE, 2023, 67
  • [3] Potential evaluation of energy flexibility and energy-saving of PCM-integrated office building walls
    Dong, Yuanyuan
    Zhang, Ling
    Wang, Pengcheng
    Liu, Zhongbing
    Su, Xiaosong
    Liao, Hongjing
    Jiang, Xiangyang
    JOURNAL OF BUILDING ENGINEERING, 2023, 79
  • [4] THERMAL PERFORMANCE ANALYSIS OF SENSIBLE AND PCM-INTEGRATED THERMAL INSULATION LAYERS TO IMPROVE THERMAL COMFORT IN BUILDING
    Kerroumi, Nordine
    Touati, Boumediene
    Virgone, Joseph
    INTERFACIAL PHENOMENA AND HEAT TRANSFER, 2020, 8 (01) : 67 - 80
  • [5] Optimizing PCM Integrated Wall and Roof for Energy Saving in Building under Various Climatic Conditions of Mediterranean Region
    Dardouri, Sana
    Tuncbilek, Ekrem
    Khaldi, Othmen
    Arici, Muslum
    Sghaier, Jalila
    BUILDINGS, 2023, 13 (03)
  • [6] Hysteresis effects on the thermal performance of building envelope PCM-walls
    Moreles, Efrain
    Huelsz, Guadalupe
    Barrios, Guillermo
    BUILDING SIMULATION, 2018, 11 (03) : 519 - 531
  • [7] Thermal performance and energy efficiency of building integrated with PCMs in hot desert climate region
    Sovetova, Meruyert
    Memon, Shazim Ali
    Kim, Jong
    SOLAR ENERGY, 2019, 189 : 357 - 371
  • [8] Sensitivity of energy performance to the selection of PCM melting temperature for the building located in Cfb climate zone
    Bozzhigitov, Abylaikhan
    Memon, Shazim Ali
    Adilkhanova, Indira
    ENERGY REPORTS, 2022, 8 : 6301 - 6320
  • [9] Energy analysis of the building integrated with a double PCM wallboard system in various climate regions of Iran
    Refahi, Amirhossein
    Rostami, Abolfazl
    Amani, Mohammad
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2023, 148 (16) : 7981 - 7993
  • [10] Evaluation of global energy performance of building walls integrating PCM: Numerical study in semi-arid climate in Morocco
    Salihi, Mustapha
    El Fiti, Maryam
    Harmen, Yasser
    Chhiti, Younes
    Chebak, Ahmed
    Alaoui, Fatima Ezzahrae M'Hamdi
    Achak, Mounia
    Bentiss, Fouad
    Jama, Charafeddine
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2022, 16