Research on environmental dust pollution: ventilation and dust space-time evolution law of a fully mechanized mining face with 7-m mining height

To investigate the influence of dust produced by multi-dust sources at a fully mechanized mining face with a large mining height on the safety conditions in a coal mine, the No. 22305 fully mechanized mining face of the Bulianta coal mine was considered as the research object in this study, and the space-time evolution of dust was analyzed with computational fluid dynamics (CFD). The wind flow simulation results show that the distribution law of wind flow is mainly affected by the structure of the roadway, and the speed and direction of the wind flow change greatly while passing by corners and through large-scale equipment. The dust generation and pollution diffusion laws with respect to time and space were investigated based on simulations of dust production due to 5-s, 30-s, and 60-s coal cutting, continuous coal cutting, and hydraulic support shifting. The space-time evolution law under different dust-producing times shows the transportation and diffusion procedure of dust under the wind flow; the dust-generated via coal mining and shifting were superposed on the downwind side and a 36-m-long dust belt was formed, which filled the coal mining space; the dust concentration in the breathing zone 120 m downwind the front drum had a dust concentration higher than 1700 mg/m(3), this was the crucial dust-proof area, and effective dust reduction methods should be addressed.