Punching Shear in Post-Tensioned Flat Slabs with Shear Reinforcement: Codes and Tests

被引：1

作者：

Carvalho, Alessandra L. ^{[1
]}

Melo, Guilherme S. ^{[2
]}

Gomes, Ronaldo B. ^{[3
]}

机构：

[1] Pontifical Catholic Univ Goias, Goiania, Go, Brazil

[2] Univ Brasilia, Dept Civil & Environm Engn, BR-70910900 Brasilia, DF, Brazil

[3] Univ Fed Goias, Postgrad Course, Jatai, Go, Brazil

来源：

ACI STRUCTURAL JOURNAL | 2016年 / 113卷 / 02期

关键词：

flat slabs; post-tensioning; punching; stud shear reinforcement; unbonded tendons; COLUMNS;

D O I：

10.14359/51688197

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The experimental punching capacities results of 27 punching tests on 160 to 200 mm (6.30 to 7.87 in.) deep post-tensioned slabs-all but three of them containing stud-rail shear reinforcement-are compared with resistances calculated by the methods of ACI 318 and Eurocode 2. The experimental study describing 17 of these tests were published in a previous paper. The slabs, 200 mm (7.87 in.) thick and 3.0 m (9.84 ft) square, were loaded at their centers and simply supported near their edges. Fifteen contained shear reinforcement in the form of stud rails and the principal variables in the series were those of the shear reinforcement. The study concluded that both codes' equations are conservative and suggestions on amendments are presented to improve their accuracies, based on experimental results.

引用

页码：337 / 348

页数：12

共 14 条

[1]

ACI Committee 318, 2019, CODE31819 ACI, DOI DOI 10.14359/51716937

[2]

[Anonymous], 2005, THESIS

[3]

[Anonymous], 2008, 4211R08 ACI

[4]

[Anonymous], 2004, EUROCODE 2 DESIGN CO

[5]

Carvalho AL, 2012, ACI STRUCT J, V109, P579

[6]

Carvalho AL, 2011, ACI STRUCT J, V108, P523

[7]

Ceb-fip, 1993, CEB-FIP model code 90

[8]

Fortunato P. A. G., 2005, THESIS

[9]

Gayed RB, 2006, ACI STRUCT J, V103, P710

[10]

HAWKINS NM, 1981, J PRESTR CONCRETE I, V26, P94

← 1 2 →