Multicriterion Assessment of Wear Resistance of Fe-Mn-C-B Eutectic Coatings Alloyed with Si, Ni, and Cr

被引：8
作者：
Pashechko, M. [1 ]
Montusiewicz, J. [1 ]
Dziedzic, K. [1 ]
Jozwik, J. [1 ]
机构：
[1] Lublin Univ Technol, Lublin, Poland
来源：
POWDER METALLURGY AND METAL CERAMICS | 2017年 / 56卷 / 5-6期
关键词：
wear resistance; eutectic coatings; multicriterion analysis;
D O I：
10.1007/s11106-017-9899-z
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The results of tribological studies on Fe-Mn-C-B eutectic coatings alloyed with Si, Ni, and Cr are presented. The coatings are produced by gas metal arc welding with use of powder wires (2.4 mm in diameter). Multicriterion assessment is used to analyze the tribological properties of the coatings and determine the most wear-resistant one. This assessment involves first a search of Pareto optimum solutions and then compromise solutions with use of the Chebyshev norm. This approach allows choosing the coating that shows the highest abrasive wear resistance among the six eutectic materials under study at a specific load varying from 3 to 15 MPa.
引用
收藏
页码：316 / 322
页数：7
相关论文
共 50 条
[41]   Influence of Laser Cladding Parameters on Microstructure, Microhardness, Chemical Composition, Wear and Corrosion Resistance of Fe-B Composite Coatings Reinforced with B4C and Si Particles [J].
Bartkowski, Dariusz ;
Bartkowska, Aneta ;
Piasecki, Adam ;
Jurci, Peter .
COATINGS, 2020, 10 (09)
[42]   Microstructure and Wear Resistance of Laser-Clad (Co, Ni)61.2B26.2Si7.8Ta4.8 Coatings [J].
Zhang, Luan ;
Wang, Cunshan ;
Qian, Shengnan ;
Yu, Qun ;
Dong, Chuang .
METALS, 2017, 7 (10)
[43]   Evolution in microstructure features and properties of Mo-containing Fe-Cr-Ni-B-Si composite coatings by laser cladding [J].
Cao, Silong ;
Liang, Jun ;
Zhou, Jiansong .
MATERIALS CHARACTERIZATION, 2022, 188
[44]   Analysis of a Ni-Fe-Cr-Mo-Si hardfacing alloy manufactured by laser cladding: influence of the iron content on the wear resistance properties [J].
Aubry, P. ;
Blanc, C. ;
Demirci, I ;
Gorny, C. ;
Maskrot, H. .
10TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES [LANE 2018], 2018, 74 :210-213
[45]   Thermodynamic Modeling of the Phase Composition of Fe-Me-C-B System Coatings Materials to Increase Crack Resistance, Hardness, and Wear Resistance [J].
Ivanov, O. O. ;
Prysyazhnyuk, P. M. ;
Marynenko, S. Yu. ;
Bodrova, L. G. ;
Kramar, G. M. ;
Koval, I. V. .
STRENGTH OF MATERIALS, 2025, 57 (02) :304-311
[46]   On the microstructure and wear resistance of Fe-based composite coatings processed by plasma cladding with B4C injection [J].
Lyu, Yezhe ;
Sun, Yufu ;
Jing, Fengyu .
CERAMICS INTERNATIONAL, 2015, 41 (09) :10934-10939
[47]   Wear resistance of HVOF sprayed coatings from mechanically activated thermally synthesized Cr3C2-Ni spray powder [J].
Sarjas, Heikki ;
Kulu, Priit ;
Juhani, Kristjan ;
Viljus, Mart ;
Matikainen, Ville ;
Vuoristo, Petri .
PROCEEDINGS OF THE ESTONIAN ACADEMY OF SCIENCES, 2016, 65 (02) :101-106
[48]   Improving wear and corrosion resistance of U71Mn rail steel subjected to laser in-situ fabrication of Fe based Cr -V coatings [J].
Yang, Yuling ;
Xin, Yingxin ;
Chen, Hongnan ;
Liu, Zhenyu ;
Wang, Bo ;
Qiao, Hongchao ;
Zhang, Erlin .
WEAR, 2024, 546
[49]   Wear Resistance of Austenitic Steel Fe–17Mn–6Si–0.3C with High Silicon and High Manganese [J].
Haitao Si ;
Renlong Xiong ;
Fan Song ;
Yuhua Wen ;
Huabei Peng .
Acta Metallurgica Sinica(English Letters), 2014, 27 (02) :352-358
[50]   Wear Resistance of Austenitic Steel Fe–17Mn–6Si–0.3C with High Silicon and High Manganese [J].
Haitao Si ;
Renlong Xiong ;
Fan Song ;
Yuhua Wen ;
Huabei Peng .
Acta Metallurgica Sinica (English Letters), 2014, 27 :352-358
12345