Multicriterion Assessment of Wear Resistance of Fe-Mn-C-B Eutectic Coatings Alloyed with Si, Ni, and Cr

被引：8
作者：
Pashechko, M. [1 ]
Montusiewicz, J. [1 ]
Dziedzic, K. [1 ]
Jozwik, J. [1 ]
机构：
[1] Lublin Univ Technol, Lublin, Poland
来源：
POWDER METALLURGY AND METAL CERAMICS | 2017年 / 56卷 / 5-6期
关键词：
wear resistance; eutectic coatings; multicriterion analysis;
D O I：
10.1007/s11106-017-9899-z
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The results of tribological studies on Fe-Mn-C-B eutectic coatings alloyed with Si, Ni, and Cr are presented. The coatings are produced by gas metal arc welding with use of powder wires (2.4 mm in diameter). Multicriterion assessment is used to analyze the tribological properties of the coatings and determine the most wear-resistant one. This assessment involves first a search of Pareto optimum solutions and then compromise solutions with use of the Chebyshev norm. This approach allows choosing the coating that shows the highest abrasive wear resistance among the six eutectic materials under study at a specific load varying from 3 to 15 MPa.
引用
收藏
页码：316 / 322
页数：7
相关论文
共 50 条
[21]   Wear Resistance of Detonation-Sprayed Cr-Si-B Coatings Under Friction at Elevated Temperatures [J].
Nedaiborshch, S. D. ;
Shchepetov, V. V. .
POWDER METALLURGY AND METAL CERAMICS, 2014, 53 (1-2) :64-69
[22]   Effects of Nb on microstructure and wear resistance of Fe-Cr-C-B surfacing alloy [J].
Gou, Jian ;
Liu, Zheng-jun ;
Jia, Hua .
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2018, 25 (02) :243-251
[23]   Improvement in wear and corrosion resistance of AISI 1020 steel by high velocity oxy-fuel spray coating containing Ni-Cr-B-Si-Fe-C [J].
Prince, M. ;
Thanu, A. Justin ;
Gopalakrishnan, P. .
HIGH TEMPERATURE MATERIALS AND PROCESSES, 2012, 31 (02) :149-155
[24]   Microstructure and Abrasive Wear Resistance of Deposited Materials of the Ni–Cr–B–Si System with Inclusions of Dispersed Phases [J].
S. О. Luzan ;
А. S. Luzan .
Materials Science, 2020, 56 :381-388
[25]   Role of Structural Factor in Elevation of Wear Resistance of a Ni - Cr - B - Si Coating after Laser Treatment [J].
Afanas'eva, L. E. ;
Ratkevich, G. V. ;
Novoselova, M. V. .
METAL SCIENCE AND HEAT TREATMENT, 2020, 61 (9-10) :581-587
[26]   Role of Structural Factor in Elevation of Wear Resistance of a Ni – Cr – B – Si Coating after Laser Treatment [J].
L. E. Afanas’eva ;
G. V. Ratkevich ;
M. V. Novoselova .
Metal Science and Heat Treatment, 2020, 61 :581-587
[27]   Effect of molybdenum on the microstructure and wear resistance of hypoeutectic Fe-Cr-B-C hardfacing alloys [J].
汪圣林 ;
崔丽 ;
贺定勇 ;
刘昊 ;
王旭 .
China Welding, 2018, 27 (04) :46-51
[28]   Influence of Carbon on the Wear Resistance, Strength, and Hardness of Composites with a Fe-Cr-Mn-Mo-N-C Matrix [J].
Konovalov, M. S. ;
Lad'yanov, V. I. ;
Mokrushina, M. I. ;
Ovcharenko, P. G. .
TECHNICAL PHYSICS, 2024, 69 (01) :8-13
[29]   On a determination of wear resistance and adhesion of molybdenum, Cr-Ni and Cr-Mn steel coatings thermally sprayed on a 35CrMo4 steel [J].
Laribi, M ;
Vannes, AB ;
Treheux, D .
SURFACE & COATINGS TECHNOLOGY, 2006, 200 (08) :2704-2710
[30]   Microstructure and Abrasive Wear Resistance of Deposited Materials of the Ni-Cr-B-Si System with Inclusions of Dispersed Phases [J].
Luzan, S. O. ;
Luzan, A. S. .
MATERIALS SCIENCE, 2020, 56 (03) :381-388
12345