Multicriterion Assessment of Wear Resistance of Fe-Mn-C-B Eutectic Coatings Alloyed with Si, Ni, and Cr

被引:8
作者
Pashechko, M. [1 ]
Montusiewicz, J. [1 ]
Dziedzic, K. [1 ]
Jozwik, J. [1 ]
机构
[1] Lublin Univ Technol, Lublin, Poland
关键词
wear resistance; eutectic coatings; multicriterion analysis;
D O I
10.1007/s11106-017-9899-z
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The results of tribological studies on Fe-Mn-C-B eutectic coatings alloyed with Si, Ni, and Cr are presented. The coatings are produced by gas metal arc welding with use of powder wires (2.4 mm in diameter). Multicriterion assessment is used to analyze the tribological properties of the coatings and determine the most wear-resistant one. This assessment involves first a search of Pareto optimum solutions and then compromise solutions with use of the Chebyshev norm. This approach allows choosing the coating that shows the highest abrasive wear resistance among the six eutectic materials under study at a specific load varying from 3 to 15 MPa.
引用
收藏
页码:316 / 322
页数:7
相关论文
共 50 条
[11]   Investigation on Microstructure and Dry Sliding Wear Behavior of a Novel Fe-Cr-B-C-Al-Si-Mn Composite Coatings on 2Cr13 Steel by Laser Cladding [J].
Jian Gu ;
Dongqing Li ;
Shengchun Liu ;
Jiajun Si ;
Songlin Cai ;
Xuliang Liu ;
Peng Liu ;
Kaiming Wang .
Journal of Materials Engineering and Performance, 2022, 31 :2381-2390
[12]   Investigation on Microstructure and Dry Sliding Wear Behavior of a Novel Fe-Cr-B-C-Al-Si-Mn Composite Coatings on 2Cr13 Steel by Laser Cladding [J].
Gu, Jian ;
Li, Dongqing ;
Liu, Shengchun ;
Si, Jiajun ;
Cai, Songlin ;
Liu, Xuliang ;
Liu, Peng ;
Wang, Kaiming .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (03) :2381-2390
[13]   Effect of Titanium on the Structure and Properties of Clad Metal from Powder Wires of Fe – C – Si – Mn – Cr – W– V and Fe – C – Si – Mn – Cr – Mo – Ni Systems [J].
N. V. Kibko ;
A. A. Usol’tsev ;
A. R. Mikhno ;
A. A. Sychev .
Metal Science and Heat Treatment, 2022, 64 :281-284
[14]   Wear Resistance of Detonation-Sprayed Cr–Si–B Coatings Under Friction at Elevated Temperatures [J].
S. D. Nedaiborshch ;
V. V. Shchepetov .
Powder Metallurgy and Metal Ceramics, 2014, 53 :64-69
[15]   Effects of Nb on microstructure and wear resistance of Fe–Cr–C–B surfacing alloy [J].
Jian Gou ;
Zheng-jun Liu ;
Hua Jia .
Journal of Iron and Steel Research International, 2018, 25 :243-251
[16]   Effect of Titanium on the Structure and Properties of Clad Metal from Powder Wires of Fe - C - Si - Mn - Cr - W- V and Fe - C - Si - Mn - Cr - Mo - Ni Systems [J].
Kibko, N., V ;
Usol'tsev, A. A. ;
Mikhno, A. R. ;
Sychev, A. A. .
METAL SCIENCE AND HEAT TREATMENT, 2022, 64 (5-6) :281-284
[17]   Microstructure and wear-resistance of Fe-Cr-B alloy coatings fabricated by detonation gun [J].
Jin, HW ;
Park, CG ;
Kim, MC .
THERMAL SPRAY, VOLS 1 AND 2: MEETING THE CHALLENGES OF THE 21ST CENTURY, 1998, :111-116
[18]   Microstructure and surface wear resistance in rapidly quenched Fe-Cr-B alloy spray coatings [J].
Jin, H. W. ;
Park, C. G. ;
Kim, M. C. .
CURRENT APPLIED PHYSICS, 2001, 1 (06) :473-477
[19]   Wear Resistance of the Coatings of Fe-Cr-\Mn-Ti-Al System Sprayed from Powder Wires [J].
Bohun, L., I ;
Kovbasyuk, T. M. ;
Kushpir, V., I ;
Humenyuk, I. A. .
MATERIALS SCIENCE, 2019, 55 (02) :219-225
[20]   Wear Resistance of Detonation-Sprayed Cr-Si-B Coatings Under Friction at Elevated Temperatures [J].
Nedaiborshch, S. D. ;
Shchepetov, V. V. .
POWDER METALLURGY AND METAL CERAMICS, 2014, 53 (1-2) :64-69