Sandwich structured ceramic matrix composites with periodic cellular ceramic cores: an active cooled thermal protection for space vehicles

被引:70
作者
Ferrari, Luca [1 ,4 ]
Barbato, Maurizio [1 ]
Esser, Burkard [2 ,3 ]
Petkov, Ivaylo [2 ,3 ]
Kuhn, Markus [2 ,3 ]
Gianella, Sandro [4 ]
Barcena, Jorge [5 ]
Jimenez, Christina [5 ]
Francesconi, Daniele [6 ]
Liedtke, Volker [7 ]
Ortona, Alberto [1 ]
机构
[1] SUPSI ICIMSI, Manno, Switzerland
[2] DLR Koln, Cologne, Germany
[3] DLR Stuttgart, Stuttgart, Germany
[4] EngiCer, Balerna, Switzerland
[5] Tecnalia, San Sebastian, Spain
[6] Thales Alenia Space, Turin, Italy
[7] Aerosp & Adv Composites, Wiener Neustadt, Austria
关键词
INFILTRATED SICF/SIC COMPOSITES; SOLAR RECEIVER APPLICATION; ELECTROPHORETIC DEPOSITION; PRESSURE-DROP; FABRICATION; FLOW;
D O I
10.1016/j.compstruct.2016.07.043
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Ceramic cellular structures and ceramic matrix composites (CMCs), are promising materials for thermal protection systems (TPS) of future space vehicles. This is because of the good thermal properties of their cellular cores coupled with the matchless thermo-mechanical resistance of their CMC skins. A high temperature TPS with active cooling accomplished by flowing a gas into the sandwich's core is investigated in this work. Three-dimensional thermo fluid dynamics analysis was first performed to evaluate the heat exchange in the ceramic sandwich under a Earth re-entry condition. The simulations, aiming at optimizing the TPS configuration, analysed several cellular ceramics structures by varying inlet and outlet positions, the coolant fluid and mass flows. A hexagonal cell was chosen as basic element of the porous ceramic. Sandwich structure components were produced and assembled by joining. Finally a prototypic leading edge was produced and tested in plasma wind tunnel in a standard re-entry condition. Cooling was performed with diffetent gases and mass flows. Results are reported and discussed. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:61 / 68
页数:8
相关论文
共 36 条
[11]  
Glass D.E., 15 AIAA SPAC PLAN HY, P1
[12]   Planetary-entry gas dynamics [J].
Gnoffo, PA .
ANNUAL REVIEW OF FLUID MECHANICS, 1999, 31 :459-494
[13]  
Heidenreich B, PROCESSING PROPERTIE, V234, P183
[14]  
Hurwitz F.I., 2010, Encyclopedia of Aerospace Engineering
[15]  
Koenig KJ, 2009, NASA TECH BRIEFS, P36
[16]   Pressure drop during air flow in aluminum foams [J].
Mancin, Simone ;
Zilio, Claudio ;
Cavallini, Alberto ;
Rossetto, Luisa .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (15-16) :3121-3130
[17]  
Mills NJ, 2007, POLYMER FOAMS HANDBOOK: ENGINEERING AND BIOMECHANICS APPLICATIONS AND DESIGN GUIDE, P1
[18]  
Nield DA, 2006, CONVECTION POROUS ME, V3
[19]   Tubular Si-infiltrated SiCf/SiC composites for solar receiver application - Part 2: Thermal performance analysis and prediction [J].
Ortona, A. ;
Yoon, D. H. ;
Fend, T. ;
Feckler, G. ;
Smirnova, O. .
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2015, 140 :382-387
[20]   Tubular Si-infiltrated SiCf/SiC composites for solar receiver application-Part 1: Fabrication by replica and electrophoretic deposition [J].
Ortona, A. ;
Fend, T. ;
Yu, H. W. ;
Raju, K. ;
Fitriani, P. ;
Yoon, D. H. .
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2015, 132 :123-130