Residual Stress Distribution Caused by Laser Hardening and Conventional Quenching in Plain Carbon Steel

被引：3

作者：

Filep, A. ^{[1
]}

Benke, M. ^{[2
]}

Mertinger, V. ^{[1
]}

Buza, G. ^{[3
]}

机构：

[1] Univ Miskolc, Inst Phys Met Metalforming & Nanotechnol, H-3515 Miskolc, Hungary

[2] Univ Miskolc, MTA ME Mat Sci Res Grp, Miskolc, Hungary

[3] Bay Zoltan Appl Res Nonprofit Ltd, Dept Laser Technol, H-1116 Budapest, Hungary

来源：

RESIDUAL STRESSES IX | 2014年 / 996卷

关键词：

laser hardening; residual stress measurement; X-ray diffraction;

D O I：

10.4028/www.scientific.net/AMR.996.538

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Heat transfer during laser hardening occurs from the surface towards the bulk in contrast to conventional quenching, where it occurs from the bulk towards the surrounding. The residual stress distributions due to laser hardening and conventional quenching of plain carbon steel samples were measured using X-ray diffraction. The effect of changing the treatment parameters, that is laser power and feed rate, was examined on the resulting stress distribution. The relationship between the measured stress distribution and the evolved microstructure is established.

引用

页码：538 / +

页数：2

共 10 条

[1] [Anonymous], 1980, KRAUSS PRINCIPLES HE, P268
[2] Davis J. R., 1991, ASM HDB HEAT TREATME
[3] Davis J.R., 2002, Surface Hardening of Steels: understanding the Basics
[4] Denis S., 1994, INT C RES STRESS ICR, P513
[5] Haimbaugh R., 2015, PRACTICAL INDUCTION
[6] Rudnev Valery, 2003, HDB INDUCTION HEATIN, P303
[7] Schajer GS, 2013, PRACTICAL RESIDUAL STRESS MEASUREMENT METHODS, P1, DOI 10.1002/9781118402832
[8] Effect of laser surface hardening on the microstructure, hardness and residual stresses of austempered ductile iron grades
Soriano, C.
Leunda, J.
Lambarri, J.
Garcia Navas, V.
Sanz, C.
[J]. APPLIED SURFACE SCIENCE, 2011, 257 (16) : 7101 - 7106
[9] Totten G., 2002, Handbook of Residual Stress and Deformation of Steel
[10] A STUDY ON RESIDUAL-STRESSES IN LASER SURFACE HARDENING OF A MEDIUM CARBON-STEEL
YANG, YS
NA, SJ
[J]. SURFACE & COATINGS TECHNOLOGY, 1989, 38 (03) : 311 - 324

← 1 →