Strength of liquid-phase-sintering cordierite ceramics

被引：1

作者：

Liang, H ^{[1
]}

Yang, HB ^{[1
]}

Xie, ZY ^{[1
]}

Xu, TX ^{[1
]}

Xu, MX ^{[1
]}

机构：

[1] Tianjin Univ, Minist Educ, Key Lab Adv Ceram & Machining Technol, Tianjin 300072, Peoples R China

来源：

HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2 | 2005年 / 280-283卷

关键词：

cordierite ceramics; liquid-phase-sintering; strength; sol-gel progress;

D O I：

10.4028/www.scientific.net/KEM.280-283.1017

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The high dense pure cordierite ceramics and liquid-phase-sintering cordierite ceramics were prepared with the starting powder made by sol-gel progress. The porosities of them are less than 6.21%, and some can be up to 1.0% especially. The flexural strength of the sample can get to 167 MPa, which is greater than that of 103 MPa of pure cordierite ceramics. The composition, fracture behavior and microstructure of the liquid-phase-sintering cordierite ceramics are investigated. The result shows that the increased flexural strength is mainly attributed to the change in cell parameters of cordierite and the small grain size.

引用

页码：1017 / 1020

页数：4

共 11 条

[1] Processing-microstructure-property relations in mullite-cordierite composites
Ebadzadeh, T
Lee, WE
[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1998, 18 (07) : 837 - 848
[2] Synthesis of cordierite monolithic honeycomb by solid state reaction of precursor oxides
González-Velasco, JR
Gutiérrez-Ortiz, MA
Ferret, R
Aranzabal, A
Botas, JA
[J]. JOURNAL OF MATERIALS SCIENCE, 1999, 34 (09) : 1999 - 2002
[3] Haase W, 1999, CFI-CERAM FORUM INT, V76, P9
[4] CRYSTAL-STRUCTURES AND MECHANISM OF THERMAL-EXPANSION OF HIGH CORDIERITE AND ITS SOLID-SOLUTIONS
IKAWA, H
OTAGIRI, T
IMAI, O
SUZUKI, M
URABE, K
UDAGAWA, S
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1986, 69 (06) : 492 - 498
[5] LIU J, 1992, E CHINA I CHEM TECHN, V18, P28
[6] Sai S. V. S., 1993, J AM CERAM SOC, V76, P1873
[7] SEN M, 2001, J MAT LETT, V47, P205
[8] TIAN FR, 1993, INORGANIC MAT STRUCT
[9] DYNAMIC SAMPLING PLANS IN ONLINE CONTROL CHARTS
WU, YH
SRIVASTAVA, MS
[J]. CANADIAN JOURNAL OF STATISTICS-REVUE CANADIENNE DE STATISTIQUE, 1993, 21 (04): : 409 - 419
[10] The sintering characteristics of MgO-CaO-Al2O3-SiO2 composite powder made by sol-gel method
Yang, CF
[J]. CERAMICS INTERNATIONAL, 1998, 24 (04) : 243 - 247

← 1 2 →