Synthesis of and densification of oxygen-conducting La0.8Sr0.2Ga0.8Mg0.2O2.8 nano powder prepared from a low temperature hydrothermal urea precipitation process

被引:42
作者
Chen, Te-Yuan [1 ]
Fung, Kuan-Zong [1 ]
机构
[1] Natl Cheng Kung Univ, Dept Mat Sci & Engn, Ctr Micro Nanosci & Technol, Tainan 701, Taiwan
关键词
SOFC; hydrothermal; LaGaO3; electrolyte; urea hydrolysis;
D O I
10.1016/j.jeurceramsoc.2007.08.006
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this work, the solid electrolyte powder having a composition of La0.8Sr0.2Ga0.8Mg0.2O3 (LSGM) was prepared by the hydrolysis of a urea-containing (CO(NH2)2) solution under hydrothermal conditions and followed by calcination at a temperature range between 350 and 900 degrees C in air. The particles precipitated after reaction between ammonia, decomposed from urea, and a stock solution containing metal nitrates. Samples characterizations were performed using X-ray diffractometry (XRD), thermogravimetry analysis (TGA), differential thermal analysis (DTA), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Thermal analysis was used to verify the decomposition of the precursor. The results show that crystalline phase of GaO(OH) was formed in the dried precursors. After heating up to similar to 350 degrees C, the crystalline La(OH)(3) was gradually formed. Subsequently, the La(OH)(3) decomposed to La2O3 at temperatures ranging from 500 to 800 degrees C. Several reflections based on LSGM perovskite were observed at 800 degrees C. After the precursors were further calcined at 900 degrees C for 12 h, single-phase perovskite, LSGM, was formed without any traceable impurities based on XRD diffraction analysis. TEM observations show LSGM powders with an average particle size of similar to 150 nm after calcination at 900 degrees C for 12 It. The LSGM powders agglomerated together due to the necking behavior at 1100 degrees C. This result also indicates that LSGM powders started to density at relatively low temperature when the powder is synthesized using a hydrothermal urea precipitation process. The hydrothermally processed LSGM samples were finally sintered at 1400 degrees C for 3 h. The relative density of sintered LSGM bulk sample was as high as 98%. The electrical conductivity of hydrothermally processed LSGM was measured to be 0.056 S/cm at 800 degrees C. (c) 2007 Published by Elsevier Ltd.
引用
收藏
页码:803 / 810
页数:8
相关论文
共 21 条
[1]  
BLENDELL JE, 1984, AM CERAM SOC BULL, V63, P797
[2]   REACTIVE CERIUM(IV) OXIDE POWDERS BY THE HOMOGENEOUS PRECIPITATION METHOD [J].
CHEN, PL ;
CHEN, IW .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1993, 76 (06) :1577-1583
[3]   Comparison of dissolution behavior and ionic conduction between Sr and/or Mg doped LaGaO3 and LaA1O3 [J].
Chen, TY ;
Fung, KZ .
JOURNAL OF POWER SOURCES, 2004, 132 (1-2) :1-10
[4]   Synthesis and characterization of IT-electrolyte with perovskite structure La0.8Sr0.2Ga0.85Mg0.15O3-δ by glycine-nitrate combustion method [J].
Cong, LG ;
He, TM ;
Ji, YA ;
Guan, PF ;
Huang, YL ;
Su, WH .
JOURNAL OF ALLOYS AND COMPOUNDS, 2003, 348 (1-2) :325-331
[5]   Second phases in doped lanthanum gallate perovskites [J].
Djurado, E ;
Labeau, M .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1998, 18 (10) :1397-1404
[6]   ELECTRICAL PROPERTIES OF SOLID OXIDE ELECTROLYTES [J].
ETSELL, TH ;
FLENGAS, SN .
CHEMICAL REVIEWS, 1970, 70 (03) :339-&
[7]   The effect of doping and processing conditions on properties of La1-xSrxGa1-yMgyO3-α [J].
Gorelov, VP ;
Bronin, DI ;
Sokolova, JV ;
Näfe, H ;
Aldinger, F .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2001, 21 (13) :2311-2317
[8]  
Gregg S.J., 1982, ADSORPTION SURFACE A, P35
[9]  
Huang KQ, 1998, J AM CERAM SOC, V81, P2565, DOI 10.1111/j.1151-2916.1998.tb02662.x
[10]   Wet chemical synthesis of Sr- and Mg-doped LaGaO3, a perovskite-type oxide-ion conductor [J].
Huang, KQ ;
Goodenough, JB .
JOURNAL OF SOLID STATE CHEMISTRY, 1998, 136 (02) :274-283