Effects of 160 MeV Ni12+ ion irradiation on polypyrrole conducting polymer electrode materials for all polymer redox supercapacitor

Electronically conducting polymers are suitable electrode materials for high performance supercapacitors, for their high specific capacitance and high do conductivity in the charged state. Supercapacitors and batteries are energy storage and conversion systems which satisfies the requirements of high specific power and energy in a complementary way. Ion beam {energy > 1 MeV} irradiation on the polymer is a novel technique to enhance or alter the properties like conductivity, density, chain length and solubility. Conducting polymer polypyrrole thin films doped with LiClO4 are synthesized electrochemically on ITO coated glass substrate and are irradiated with 160 MeV Ni12+ ions at different fluence 5 x 10(10), 5 x 10(11) and 3 x 10(12) ions cm(-2). Dc conductivity measurement of the irradiated films showed 50-60% increase in conductivity which is may be due to increase of carrier concentration in the polymer film as observed in ITV-Vis spectroscopy and other effects like cross-linking of polymer chain, bond breaking and creation of defects sites. X-ray diffractogram study shows that the degree of crystallinity of polypyrrole increases in SHI irradiation and is proportionate to ion fluence. The capacitance of the irradiated films is lowered but the capacitance of the supercapacitors with irradiated films showed enhanced stability compared to the devices with unirradiated films while characterized for cycle life up to 10,000 cycles. (c) 2005 Elsevier B.V. All rights reserved.