Lithological mapping and fuzzy set theory: Automated extraction of lithological boundary from ASTER imagery by template matching and spatial accuracy assessment

Lithological boundaries provide information useful for activities such as mineral and hydrocarbon exploration, water resource surveys, and natural hazard evaluation. Automated detection of lithological boundaries reduces bias inherent in expert interpretation of boundaries and thus improves the reliability of lithological mapping. The Rotation Variant Template Matching (RTM) algorithm was applied to ASTER imagery to detect pre-defined lithological boundaries. Templates incorporating the mineral combinations gypsum-calcite and calcite-illite were designed to detect boundaries between evaporites, marly limestone, and sandstone. The RTM algorithm successfully detected lithological boundaries by rotating the templates over the ASTER imagery. The accuracy of the detected boundaries was spatially assessed using fuzzy set theory. Boundaries from a published geological map and boundaries interpreted from a stereo pair of aerial photos by five experts were used as references for assessing the accuracy. A confidence region unifying spatial errors was defined for the geological map and stereo-pair interpretation to provide boundary zones from these references. The correspondence between detected boundaries and the boundary zones of the aerial photo was better than between detected boundaries and boundary zones of the geological map. (C) 2011 Elsevier B.V. All rights reserved.