Performance of Silicone Rubber Composites with SiO2 Micro/Nano-filler under AC Corona Discharge

Outdoor insulators are often subject to corona discharges and the problem is becoming more prevalent with the increasing use of higher transmission voltage levels. For polymeric insulators, exposure to such discharges can alter the chemical structure of basic polymer and degrade surface properties. This paper investigates the effect of micro and/or nano fillers in silicone rubber composites in suppressing such damage. Four different types of samples are fabricated: pristine silicone rubber (PR), 30wt% micron-sized silica/silicone rubber (MC), 27.5wt% micron + 2.5wt% nano silica/silicone rubber (NMC), and 5wt% nano silica/silicone rubber (NC) composites. Samples are exposed to AC corona using a needle to ground-plane electrode setup. Experimental results are analyzed based on five different measurement methods: phase-resolved partial discharge (PD), hydrophobicity loss-recovery, Scanning Electron Microscopy (SEM), Surface roughness and Fourier Transform Infrared Spectroscopy (FTIR). Results indicate that NC shows a strong resistance to partial discharges and hydrophobicity loss. In the area below the needle tip, higher hydrophobicity loss and higher recovery are observed as compared to the vicinity region. Variations in surface roughness, appearance of crackles, voids, pits, surface splitting into blocky structures and damages to chemical structure of silicone rubber are appreciably retarded in NC as compared to PR, MC and NMC. Based on NMC results, it is found that addition of nano-sized silica can be an attractive approach to improve the corona resistance of micron-sized silica filled silicone rubber.