Performance of rotary kiln reactor for the elephant grass pyrolysis

被引:73
|
作者
De Conto, D. [1 ]
Silvestre, W. P. [1 ]
Baldasso, C. [1 ]
Godinho, M. [1 ]
机构
[1] Univ Caxias Sul, Ctr Exact Sci & Technol, Postgrad Program Proc Engn & Technol, Caxias Do Sul, RS, Brazil
关键词
Elephant grass; Pyrolysis; Rotary kiln; Biochar; Syngas; RICH GAS-PRODUCTION; PERENNIAL GRASSES; THERMOCHEMICAL CONVERSION; AGRONOMIC PERFORMANCE; CHEMICAL-COMPOSITION; ETHANOL-PRODUCTION; BIO-OIL; BIOMASS; PRODUCTS; BIOCHAR;
D O I
10.1016/j.biortech.2016.06.082
中图分类号
S2 [农业工程];
学科分类号
0828 ;
摘要
The influence of process conditions (rotary speed/temperature) on the performance of a rotary kiln reactor for non-catalytic pyrolysis of a perennial grass (elephant grass) was investigated. The product yields, the production of non-condensable gases as well as the biochar properties were evaluated. The maximum H-2 yield was close to that observed for catalytic pyrolysis processes, while the bio-oil yield was higher than reported for pyrolysis of other biomass in rotary kiln reactors. A H-2/CO ratio suitable for Fischer-Tropsch synthesis (FTS) was obtained. The biochars presented an alkaline pH (above 10) and interesting contents of nutrients, as well as low electrical conductivity, indicating a high potential as soil amendment. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:153 / 160
页数:8
相关论文
共 50 条
  • [31] PYROLYSIS OF OIL SAND FROM THE WHITEROCKS DEPOSIT IN A ROTARY KILN
    HANSON, FV
    CHA, SM
    DEO, MD
    OBLAD, AG
    FUEL, 1992, 71 (12) : 1455 - 1463
  • [32] Thermochemical conversion of aquatic weed biomass in a rotary kiln reactor for production of bio-based derivatives
    Carregosa, Ingred Suellen Carvalho
    Carregosa, Jhonattas de Carvalho
    Silva, Wenes Ramos
    Wisniewski Jr, Alberto
    JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2023, 173
  • [33] Pyrolysis of automotive shredder residue in a bench scale rotary kiln
    Notarnicola, Michele
    Cornacchia, Giacinto
    De Gisi, Sabino
    Di Canio, Francesco
    Freda, Cesare
    Garzone, Pietro
    Martino, Maria
    Valerio, Vito
    Villone, Antonio
    WASTE MANAGEMENT, 2017, 65 : 92 - 103
  • [34] Intermediate pyrolysis of Scenedesmus microalgae in a rotary kiln pyrolyser: Effect of temperature on bio-oil yields and composition
    Nyoni, Bothwell
    Hlangothi, Shanganyane
    BIOMASS CONVERSION AND BIOREFINERY, 2024, 14 (11) : 12155 - 12165
  • [35] Preparation and characterisation of biochars from elephant grass and their utilisation for aqueous nitrate removal: Effect of pyrolysis temperature
    Adesemuyi, Mibinuola Florence
    Adebayo, Matthew Ayorinde
    Akinola, Adebisi Olayinka
    Olasehinde, Emmanuel Folorunso
    Adewole, Kehinde Abiodun
    Lajide, Labunmi
    JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, 2020, 8 (06):
  • [36] Pyrolysis behaviors of corn stover in new two-stage rotary kiln with baffle
    Hu, Erfeng
    Tian, Yishui
    Yang, Yang
    Dai, Chongyang
    Li, Moshan
    Li, Chenhao
    Shao, Si
    JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2022, 161
  • [37] Recovery of carbon black from waste tire in continuous commercial rotary kiln pyrolysis reactor
    Xu, Junqing
    Yu, Jiaxue
    He, Wenzhi
    Huang, Juwen
    Xu, Junshi
    Li, Guangming
    SCIENCE OF THE TOTAL ENVIRONMENT, 2021, 772
  • [38] Rotary kiln and batch pyrolysis of waste tire to produce gasoline and diesel like fuels
    Ayanoglu, Abdulkadir
    Yumrutas, Recep
    ENERGY CONVERSION AND MANAGEMENT, 2016, 111 : 261 - 270
  • [39] A statistical analysis of the auto thermal fast pyrolysis of elephant grass in fluidized bed reactor based on produced charcoal
    Mesa-Perez, Juan M.
    Cortez, Luis A. B.
    Marin-Mesa, Henry R.
    Rocha, Jose D.
    Pelaez-Samaniego, M. R.
    Cascarosa, Esther
    APPLIED THERMAL ENGINEERING, 2014, 65 (1-2) : 322 - 329
  • [40] Unidimensional heat transfer analysis of elephant grass and sugar cane bagasse slow pyrolysis in a fixed bed reactor
    Mesa-Perez, JM
    Cortez, LAB
    Rocha, JD
    Brossard-Perez, LE
    Olivares-Gómez, E
    FUEL PROCESSING TECHNOLOGY, 2005, 86 (05) : 565 - 575