Experimental and statistical investigations of surface roughness, vibration, and energy consumption values of titanium alloy during machining using response surface method and grey relational analysis

被引：4

作者：

Akkus, H. ^{[1
]}

机构：

[1] Nigde Omer Halisdemir Univ, Nigde Vocat Sch Tech Sci, Automot Technol Program, POB 51200, Nigde, Turkey

来源：

SCIENTIA IRANICA | 2022年 / 29卷 / 01期

关键词：

Ti; 6Al-4V; Ra; Vibration; Energy consumption; RSM; Grey relational analysis; MATERIAL REMOVAL RATE; CUTTING PARAMETERS; TURNING PROCESS; OPTIMIZATION; PREDICTION; STEEL; TI-6AL-4V; ANN;

D O I：

10.24200/sci.2021.57548.5296

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study aims to investigate the consistency between the results obtained from the turning operation. To this end, Ti 6Al-4V alloy workpiece was machined using CNC lathe. In addition, surface roughness (Ra), vibration, and energy consumption values were determined through turning. Experimental results were then analyzed statistically. Response Surface Method (RSM) and grey relational analysis were employed for statistical analysis. According to RSM analysis, grey relational analysis, and ANOVA and regression analysis, the feed rate was found the most effective parameter that negatively affects surface roughness, energy consumption, and vibration. Finally, the steps involved in conducting grey relational analysis and the process of obtaining the results were examined. (C) 2022 Sharif University of Technology. All rights reserved.

引用

页码：109 / 119

页数：11

共 33 条

[21] Optimization of process parameters for surface roughness and tool wear in milling TC17 alloy using Taguchi with grey relational analysis
Wang, Zhe
Li, Lei
ADVANCES IN MECHANICAL ENGINEERING, 2021, 13 (02)
[22] Modelling of micro-electrodischarge machining during machining of titanium alloy Ti-6Al-4V using response surface methodology and artificial neural network algorithm
Pradhan, B. B.
Bhattacharyya, B.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2009, 223 (06) : 683 - 693
[23] ANALYSIS OF THE CUTTING TEMPERATURE AND SURFACE ROUGHNESS DURING THE ORTHOGONAL MACHINING OF AISI 4140 ALLOY STEEL VIA THE TAGUCHI METHOD
Motorcu, Ali Riza
Isik, Yahya
Kus, Abdil
Cakir, Mustafa Cemal
MATERIALI IN TEHNOLOGIJE, 2016, 50 (03): : 343 - 351
[24] Kerf width analysis of wire electrical discharge machining of titanium alloy (Ti-6Al-4 V ELI) using response surface method
Abebe, Tigabu
Palani, Sivaprakasam
Prakash, J. Udaya
MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 481 - 487
[25] Optimization of process parameters in the high-speed milling of titanium alloy TB17 for surface integrity by the Taguchi-Grey relational analysis method
Du, Shunyao
Chen, Minghe
Xie, Lansheng
Zhu, Zhishou
Wang, Xinnan
ADVANCES IN MECHANICAL ENGINEERING, 2016, 8 (10): : 1 - 12
[26] Cracking performance analysis of asphalt mixtures using response surface methodology: experimental investigations and statistical optimization
Gourab Saha
Krishna Prapoorna Biligiri
Materials and Structures, 2017, 50
[27] Cracking performance analysis of asphalt mixtures using response surface methodology: experimental investigations and statistical optimization
Saha, Gourab
Biligiri, Krishna Prapoorna
MATERIALS AND STRUCTURES, 2017, 50 (01)
[28] Multi-response Optimization of Machining Parameters of Turning AA6063 T6 Aluminium Alloy using Grey Relational Analysis in Taguchi Method
Jayaraman, P.
Kumar, L. Mahesh
12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 197 - 204
[29] Determination of optimal performance in wire electrical discharge machining of Al/Al2O3/22p composites using response surface methods and grey relational analysis
Patil, Nilesh G.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2023, 21 (04) : 1259 - 1271
[30] A combination of the particle swarm optimization-artificial neurons network algorithm and response surface method to optimize energy consumption and cost during milling of the 2017A alloy
Bousnina, Kamel
Hamza, Anis
Ben Yahia, Noureddine
ENERGY EXPLORATION & EXPLOITATION, 2024, 42 (02) : 727 - 746

← 1 2 3 4 →