Analysis of Microstructure and Mechanical Properties in As-Built/As-Cast and Heat-Treated Conditions for IN718 Alloy Obtained by Selective Laser Melting and Investment Casting Processes

被引：15
作者：
Carlos Pereira, Juan [1 ]
Aranzabe, Jon [1 ]
Carmen Taboada, Mari [1 ]
Ruiz, Noelia [2 ]
Pablo Rodriguez, Pedro [2 ]
机构：
[1] Basque Res & Technol Alliance BRTA, LORTEK Technol Ctr, Arranomendia Kalea 4A, Ordizia 20240, Spain
[2] AIE, EIPC Res Ctr, Torrekua 3, Eibar 20600, Spain
来源：
CRYSTALS | 2021年 / 11卷 / 10期
关键词：
IN718; alloy; selective laser melting; investment casting; heat treatment; mechanical properties; INCONEL; 718; ALLOY; EVOLUTION; PRECIPITATION; DIRECTION; POROSITY;
D O I：
10.3390/cryst11101196
中图分类号：
O7 [晶体学];
学科分类号：
0702 ; 070205 ; 0703 ; 080501 ;
摘要：
In this work, new customized heat treatments for selective laser melted (SLM) parts in IN718 alloy were analyzed. This was done through the evaluation of the mechanical properties and advanced characterization of the phases and microstructure obtained in as-built condition and after the application of standard and tailored heat treatments. The microstructure and mechanical properties were compared and discussed with results reported in the literature. Finally, strengthening mechanisms of IN718 alloy processed by SLM and its differences with mechanisms that occur in investment casting were analyzed. Both processes generate quite different microstructures, investment casting is composed mainly by a dendritic structure, and SLM is characterized by columnar and cellular structures with very thin cells. Due to the fine and homogeneous microstructure obtained from SLM processing and its specific strengthening mechanisms, it is not necessary to apply homogenization and solution stages as in standard heat treatment used for this type of alloy in casting or wrought. The pre-heating and process parameters selected, in combination with a direct stepped aging (at 720 degrees DEG;C/620 degrees C), provide the material with its best mechanical properties, which are superior to those obtained by standard heat treatment (AMS 5383F) applied to investment casting of IN718 alloy.
引用
收藏
页数：23
相关论文
共 41 条
  • [11] Requirements of Inconel 718 Alloy or Aeronautical Applications
    Ghiban, Brandusa
    Elefterie, Cornelia Florina
    Guragata, Constantin
    Bran, Dragos
    [J]. 7TH INTERNATIONAL CONFERENCE ON STRUCTURAL ANALYSIS OF ADVANCED MATERIALS (ICSAAM 2017), 2018, 1932
  • [12] Hybrid additive manufacturing of Inconel 718 for future space applications
    Godec, M.
    Malej, S.
    Feizpour, D.
    Donik, C.
    Balazic, M.
    Klobcar, D.
    Pambaguian, L.
    Conradi, M.
    Kocijan, A.
    [J]. MATERIALS CHARACTERIZATION, 2021, 172
  • [13] Comparative evaluation of thermal and mechanical properties of nickel alloy 718 prepared using selective laser melting, spark plasma sintering, and casting methods
    Hakeem, Abbas Saeed
    Patel, Faheemuddin
    Minhas, Naeem
    Malkawi, Ameen
    Aleid, Zahra
    Ehsan, Muhammad Ali
    Sharrofna, Hussain
    Al Ghanim, Ahmed
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 12 : 870 - 881
  • [14] Helmink RC, 2014, 8TH INTERNATIONAL SYMPOSIUM ON SUPERALLOY 718 AND DERIVATIVES, P171
  • [15] A review of mechanical properties of additively manufactured Inconel 718
    Hosseini, E.
    Popovich, V. A.
    [J]. ADDITIVE MANUFACTURING, 2019, 30
  • [16] Microstructure characteristics and mechanical behaviour of a selective laser melted Inconel 718 alloy
    Huang, Liang
    Cao, Yan
    Li, Gaohong
    Wang, Yuanfei
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (02): : 2440 - 2454
  • [17] Heat treatment of Inconel 718 produced by selective laser melting: Microstructure and mechanical properties
    Huang, Wenpu
    Yang, Jingjing
    Yang, Huihui
    Jing, Guanyi
    Wang, Zemin
    Zeng, Xiaoyan
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 750 : 98 - 107
  • [18] Post-processing of the Inconel 718 alloy parts fabricated by selective laser melting: Effects of mechanical surface treatments on surface topography, porosity, hardness and residual stress
    Lesyk, D. A.
    Martinez, S.
    Mordyuk, B. N.
    Dzhemelinskyi, V. V.
    Lamikiz, A.
    Prokopenko, G., I
    [J]. SURFACE & COATINGS TECHNOLOGY, 2020, 381
  • [19] Improved plasticity of Inconel 718 superalloy fabricated by selective laser melting through a novel heat treatment process
    Li, X.
    Shi, J. J.
    Cao, G. H.
    Russell, A. M.
    Zhou, Z. J.
    Li, C. P.
    Chen, G. F.
    [J]. MATERIALS & DESIGN, 2019, 180
  • [20] Effect of heat treatment on microstructure evolution of Inconel 718 alloy fabricated by selective laser melting
    Li, Xing
    Shi, J. J.
    Wang, C. H.
    Cao, G. H.
    Russell, A. M.
    Zhou, Z. J.
    Li, C. P.
    Chen, G. F.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 764 : 639 - 649
12345