Facile growth of high transmittance ZnO micro-rod clusters on indium tin oxide by a wet-chemical synthesis method

A simple wet-chemical synthesis method was developed to fabricate Zinc oxide micro-rod clusters. The synthesis process involved the rapid dilution of a zinc-bearing alkaline solution at 150 degrees C in a convection oven on indium tin oxide (ITO) substrates. The synthesis was carried out by immersing an unseeded ITO substrate in a mixture of zinc nitrate hexahydrate (Zn(NO3)(2)center dot 6H(2)O) and hexamethylenetetramine ((CH2)(6)N-4) aqueous solution. The obtained sample was annealed at 400 degrees C for 2 h. The structural, morphological and optical properties of the synthesized ZnO microstructures were investigated by X-ray diffraction, scanning electron microscopy and ultraviolet-visible spectroscopy, respectively. The ZnO rod clusters are hexagonal phase of the wurtzite structure. The crystal grain sizes of the films were found to be 72.6, 84.3 and 66.3 nm for the (100), (002) and (101) crystal planes, respectively. The optical bandgap of the ZnO was determined to be 3.147 eV.