Effect of tow thickness on the structural response of aerospace-grade spread-tow fabrics

被引:30
作者
Arteiro, A. [1 ]
Catalanotti, G. [2 ]
Xavier, J. [3 ,4 ]
Linde, P. [5 ]
Camanho, P. P. [1 ]
机构
[1] Univ Porto, DEMec, Fac Engn, Rua Dr Roberto Frias S-N, P-4200465 Oporto, Portugal
[2] Queens Univ Belfast, Sch Mech & Aerosp Engn, Belfast BT9 5AH, Antrim, North Ireland
[3] Inst Ciencia & Inovacao Engn Mecan & Engn, INEGI, Rua Dr Roberto Frias 400, P-4200465 Oporto, Portugal
[4] Univ Tras Os Montes & Alto Douro, CITAB, Engn 1,Apartado 1013, P-5001801 Vila Real, Portugal
[5] AIRBUS Operat GmbH, Kreetslag 10, D-21129 Hamburg, Germany
关键词
Polymer-matrix composites (PMCs); Spread-tow fabrics; Mechanical properties; Mechanical testing; COMPOSITE; COMPRESSION; STRENGTH; TENSILE;
D O I
10.1016/j.compstruct.2017.06.047
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
The effect of ply thickness on the onset of intralaminar and interlaminar damage is extremely important for the structural response of laminated composite structures. This subject has gained particular interest in recent years due to the introduction in the market of spread-tow, ultra-thin carbon-fibre reinforcements with different configurations. In the present paper, an experimental test campaign was carried out to study the structural response of aerospace-grade plain weave spread-tow fabrics (STFs) of different areal weights. The results showed that, in spite of an apparent superior longitudinal tensile strength of the thick STF, the multidirectional thin-STF laminate exhibited an improved tensile unnotched strength over the thick-STF laminate, attributed to its damage suppression capability. However, damage suppression was also responsible for similar tensile notched strengths. In compression, the thin-STF laminate performed substantially better than the thick-STF laminate in both unnotched and notched configurations. Finally, a similar bearing response was obtained in both STF laminates, in spite of a slightly higher resistance of the thin-STF laminate to the propagation of subcritical damage mechanisms. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:208 / 223
页数:16
相关论文
共 24 条
[1]   Thin ply composites: Experimental characterization and modeling of size-effects [J].
Amacher, R. ;
Cugnoni, J. ;
Botsis, J. ;
Sorensen, L. ;
Smith, W. ;
Dransfeld, C. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2014, 101 :121-132
[2]  
[Anonymous], 2013, D5961D5961M13 ASTM
[3]  
[Anonymous], COMP MAT DESIGN TEST
[4]  
[Anonymous], D5766D5766M11 ASTM
[5]  
[Anonymous], 2014, ASTM D3039 D3039M 14
[6]  
[Anonymous], D6484D6484M14 ASTM
[7]   Micro-mechanical analysis of the effect of ply thickness on the transverse compressive strength of polymer composites [J].
Arteiro, A. ;
Catalanotti, G. ;
Melro, A. R. ;
Linde, P. ;
Camanho, P. P. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2015, 79 :127-137
[8]   Large damage capability of non-crimp fabric thin-ply laminates [J].
Arteiro, A. ;
Catalanotti, G. ;
Xavier, J. ;
Camanho, P. P. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2014, 63 :110-122
[9]   Notched response of non-crimp fabric thin-ply laminates [J].
Arteiro, A. ;
Catalanotti, G. ;
Xavier, J. ;
Camanho, P. P. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2013, 79 :97-114
[10]   Specimen size effect in off-axis compression tests of fiber composites [J].
Bing, Qida ;
Sun, C. T. .
COMPOSITES PART B-ENGINEERING, 2008, 39 (01) :20-26