Preparation and Analysis of Amorphous Gradient Composites on TC17 Titanium Alloy by Laser Melting Deposition (LMD)

被引：0

作者：

Liu, Z-Y ^{[1
]}

Li, J-N ^{[1
]}

Sui, Y-W ^{[1
]}

Liu, P. ^{[1
]}

Liu, K-G ^{[1
]}

机构：

[1] Shandong Jianzhu Univ, Sch Mat Sci & Engn, Jinan 250101, Shandong, Peoples R China

来源：

LASERS IN ENGINEERING | 2021年 / 48卷 / 4-6期

关键词：

High power diode laser (HPDL); TC17 titanium alloy; mixed powder; laser melting deposition (LMD); amorphous phases; microstructure; wear resistance; PHYSICAL-PROPERTIES; MICROSTRUCTURE; FABRICATION; BEHAVIOR; PERFORMANCE; COATINGS;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Amorphous gradient composites were produced on a TC17 titanium alloy substrate by means of laser melting deposition (LMD) with a high power diode laser (HPDL). The bottom composites were Deloro50-Si3N4-Sb-La2O3 mixed powders and were deposited directly onto the substrate. They were found to have excellent toughness and wear resistance. The upper composites were Deloro50-Si3N4 mixed powders and were deposited directly onto the bottom composites. The test results showed that a good metallurgical bond was formed between the bottom and upper composites. Elements were seen to have entered into a laser meltpool from the TC17 titanium alloy substrate during LMD processing. These were identified as nanoparticles (NPs) and amorphous phases were produced in the composites under the actions of Sb and La2O3 which, in turn, improved the wear resistance of the surface of the TC17 titanium alloy.

引用

页码：227 / 235

页数：9

共 31 条

[1] The effect of La2O3 addition on intermetallic-free aluminium matrix composites reinforced with TiC and Al2O3 ceramic particles [J].

Ao, Min ;

Liu, Huimin ;

Dong, Chaofang .

CERAMICS INTERNATIONAL, 2019, 45 (09) :12001-12009

[2]

Bai Y, 2017, LASER ENG, V37, P233

[3] Synthesis and characterization of nickel free titanium-hydroxyapatite composite coating over Nitinol surface through in-situ laser cladding and alloying [J].

Chakraborty, Rajib ;

Raza, Mohammad Shahid ;

Datta, Susmita ;

Saha, Partha .

SURFACE & COATINGS TECHNOLOGY, 2019, 358 :539-550

[4] Fabrication of functionally-graded yttria-stabilized zirconia coatings by 355 nm picosecond dual-beam pulsed laser deposition [J].

Deng, Chun ;

Kim, Hyeongwon ;

Ki, Hyungson .

COMPOSITES PART B-ENGINEERING, 2019, 160 :498-504

[5]

Erinosho MF, 2016, LASER ENG, V35, P3

[6] Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance [J].

Gu, Dongdong ;

Zhang, Hongmei ;

Dai, Donghua ;

Xia, Mujian ;

Hong, Chen ;

Poprawe, Reinhart .

COMPOSITES PART B-ENGINEERING, 2019, 163 :585-597

[7] Microstructure and wear resistant performance of TiN/Zr-base amorphous-nanocrystalline composite coatings on titanium alloy by electrospark deposition [J].

Hong, Xiang ;

Tan, Yefa ;

Wang, Xiaolong ;

Xu, Ting ;

Gao, Li .

SURFACE & COATINGS TECHNOLOGY, 2016, 305 :67-75

[8] In-situ synthesis of aluminum/nano-quasicrystalline Al-Fe-Cr composite by using selective laser melting [J].

Kang, N. ;

El Mansori, M. ;

Lin, X. ;

Guittonneau, F. ;

Liao, H. L. ;

Huang, W. D. ;

Coddet, C. .

COMPOSITES PART B-ENGINEERING, 2018, 155 :382-390

[9]

Li JN, 2019, LASER ENG, V44, P217

[10] Effect of Sb on physical properties and microstructures of laser nano/amorphous-composite film [J].

Li, Jia-Ning ;

Gong, Shui-Li ;

Sun, Mei ;

Shan, Fei-Hu ;

Wang, Xi-Chang ;

Jiang, Shuai .

PHYSICA B-CONDENSED MATTER, 2013, 428 :73-77

← 1 2 3 4 →