High-density YSZ tapes fabricated via the multi-folding lamination process

被引：13

作者：

Capdevila, X. G. ^{[2
]}

Folch, J. ^{[1
]}

Calleja, A. ^{[2
]}

Llorens, J. ^{[2
]}

Segarra, M. ^{[2
]}

Espiell, F. ^{[2
]}

Morante, J. R. ^{[1
]}

机构：

[1] Univ Barcelona, Fac Fis, Dept Elect C Marti & Franques, EME,CeRMAE, E-08028 Barcelona, Catalonia, Spain

[2] Univ Barcelona, Fac Quim, Dept Engn Quim & Met, DIOPMA,CeRMAE, E-08028 Barcelona, Catalonia, Spain

来源：

CERAMICS INTERNATIONAL | 2009年 / 35卷 / 03期

关键词：

Tape casting; Sintering; Fuel Cells; YSZ; ZIRCONIA POWDERS; SINTERED DENSITY; SENSORS; CERAMICS; RHEOLOGY; BEHAVIOR;

D O I：

10.1016/j.ceramint.2008.06.018

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A new method of ceramic processing to obtain high green and fully sintered yttria-stabilized zirconia (YSZ) ceramic parts has been studied. The procedure involved slip casting, multi-folding lamination, and sintering. A rheological study revealed correlation between compositional parameters and densities. A particular method of folding and lamination we named multi-folding lamination was proved to be an appropriate route to obtain dense, homogeneous green bodies, reaching density values of ca. 61%. Further studies on the sintered parts were performed in this work, obtaining YSZ sintered tapes suitable for the use in high temperature solid-state devices. This tapes, sintered at 1550 degrees C, reached values of 98% of theoretical density and average particle sizes within 1.7-12 mu m. (C) 2008 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

引用

页码：1219 / 1226

页数：8

共 31 条

[1]

ADLER U, 1985, ELECT GASOLINE FUEL

[2] EVALUATION OF COMMERCIAL ZIRCONIA POWDERS FOR SOLID OXIDE FUEL-CELLS [J].