Microstructure of high temperature Ti-based brazing alloys and wettability on SiC ceramic

被引：32
作者：
Li, Jiake [1 ,2 ]
Liu, Lei [1 ]
Wu, Yating [1 ]
Li, Zhibin [1 ]
Zhang, Wenlong [1 ]
Hu, Wenbin [1 ]
机构：
[1] Shanghai Jiao Tong Univ, State Key Lab Met Matrix Composites, Shanghai 200240, Peoples R China
[2] Jingdezhen Ceram Inst, Sch Mat Sci & Engn, Jingdezhen 333001, Peoples R China
来源：
MATERIALS & DESIGN | 2009年 / 30卷 / 02期
关键词：
Non-ferrous metals and alloys (A); Chemical reactions (F); Microstructure (F);
D O I：
10.1016/j.matdes.2008.04.070
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ti-based brazing alloys were prepared by the non-consumable arc-melting technology. The wettability behavior of the brazing alloys on silicon carbide (SiC) was investigated by means of sessile drop method in vacuum at 1400 degrees C for 10 min. The brazing alloys of 91.5Ti-8.5Si (wt.%), 87.1Ti-8.1Si-4.8Cu (wt.%) and 83.2Ti-7.7Si-9.1Cu (wt.%) exhibit good wettability on SiC plate, but bad cohesion with SiC after cooling. However, the brazing alloys of 22Ti-78Si (wt.%) and 21Ti-74.2Si-4.8Cu (wt.%) exhibit both good wettability and cohesion with SiC after cooling. Microstructure, phase composition of the brazing alloys and the interface between the brazing alloys and SiC were investigated by using SEM coupled with EDS and XRD, respectively. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：275 / 279
页数：5
相关论文
共 50 条
  • [41] Hydrogen electrosorption in nanocrystalline Ti-based alloys
    Roué, L
    Guay, D
    Schulz, R
    [J]. JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 2000, 480 (1-2): : 64 - 73
  • [42] Ti-based nanostructure coating on Mg alloys
    Chiu, Y. L.
    So, V.
    Li, Z. W.
    [J]. ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2, 2007, 334-335 : 269 - +
  • [43] Characterization of Ti-based hydrogen absorbing alloys
    Deng, Guangxia
    Zhao, Xushan
    Wang, Shumao
    Liu, Xiaopeng
    Li, Zhinian
    Jiang, Lijun
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2013, 38 (29) : 13050 - 13054
  • [44] The investigation of electronic properties of Ti-based alloys
    Kulkova, SE
    Valujsky, DV
    [J]. JOURNAL DE PHYSIQUE IV, 2001, 11 (PR8): : 53 - 58
  • [45] Wetting and spreading behavior of Ti-based brazing filler on Ti64 substrate
    Komolafe, Bolarinwa
    Mostafa, Ahmad
    [J]. MATERIALS RESEARCH EXPRESS, 2017, 4 (06):
  • [46] Wettability of Ceramic Substrates by Silver Based Alloys
    Weltsch, Z.
    Lovas, A.
    [J]. ACTA PHYSICA POLONICA A, 2013, 124 (01) : 78 - 86
  • [47] Wettability of ceramic substrates by silver based alloys
    [J]. Weltsch, Z. (weltsch@kgtt.bme.hu), 1600, Polska Akademia Nauk (124): : 78 - 86
  • [48] Effects of sintering temperature on microstructure and performance of Ti-based Ti-Mn alloy anodic material
    Hou Yong-dan
    Jiang Yao
    Lei Ting
    He Yue-hui
    [J]. JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2011, 18 (04): : 966 - 971
  • [49] Effects of sintering temperature on microstructure and performance of Ti-based Ti-Mn alloy anodic material
    Yong-dan Hou
    Yao Jiang
    Ting Lei
    Yue-hui He
    [J]. Journal of Central South University of Technology, 2011, 18 : 966 - 971
  • [50] SiC FIBRE-REINFORCED Ti-BASED COMPOSITE
    Lu Yuxiong
    Li Douxing
    Shi Nanlin
    Ma Zhongyi
    Bi Jing(Institute of Metal Research
    [J]. TransactionsofNonferrousMetalsSocietyofChina, 1996, (04) : 72 - 75
12345