Energy-Economizing Optimization of Magnesium Alloy Hot Stamping Process

被引:15
|
作者
Gao, Mengdi [1 ]
Wang, Qingyang [1 ]
Li, Lei [2 ]
Ma, Zhilin [1 ]
机构
[1] Suzhou Univ, Sch Mech & Elect Engn, Suzhou 234000, Peoples R China
[2] Hefei Univ Technol, Sch Mech Engn, Hefei 230000, Peoples R China
关键词
energy-economizing; hot stamping; lightweight material; magnesium alloy; process parameters; SHEET;
D O I
10.3390/pr8020186
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Reducing the mass of vehicles is an effective way to improve energy efficiency and mileage. Therefore, hot stamping is developed to manufacture lightweight materials used for vehicle production, such as magnesium and aluminum alloys. However, in comparison with traditional cold stamping, hot stamping is a high-energy-consumption process, because it requires heating sheet materials to a certain temperature before forming. Moreover, the process parameters of hot stamping considerably influence the product forming quality and energy consumption. In this work, the energy-economizing indices of hot stamping are established with multiobjective consideration of energy consumption and product forming quality to find a pathway by which to obtain optimal hot stamping process parameters. An energy consumption index is quantified by the developed models, and forming quality indices are calculated using a finite element model. Response surface models between the process parameters and energy-economizing indices are established by combining the Latin hypercube design and response surface methodology. The multiobjective problem is solved using a multiobjective genetic algorithm (NSGA-II) to obtain the Pareto frontier. ZK60 magnesium alloy hot stamping is applied as a case study to obtain an optimal combination of parameters, and compromise solutions are compared through stamping trials and numerical simulations. The obtained results may be used for guiding process optimization regarding energy saving and the method of manufacturing parameters selection.
引用
收藏
页数:17
相关论文
共 50 条
  • [41] A study of the process of hot deformation of magnesium alloy AZ31
    A. V. Zinov’ev
    A. M. Ionov
    L. M. Kaputkina
    P. V. Mironov
    E. Ya. Kaputkin
    Yu. M. Sigalov
    Ya. L. Solomonik
    Metal Science and Heat Treatment, 2006, 48 : 494 - 498
  • [42] Investigation of the influence of process parameters on hot extrusion of magnesium alloy tubes
    Hsiang, S. H.
    Lin, Y. W.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 192 : 292 - 299
  • [43] A study of the process of hot deformation of magnesium alloy AZ31
    Zinov'ev, A. V.
    Ionov, A. M.
    Kaputkina, L. M.
    Mironov, P. V.
    Kaputkin, E. Ya.
    Sigalov, Yu. M.
    Solomonik, Ya. L.
    METAL SCIENCE AND HEAT TREATMENT, 2006, 48 (11-12) : 494 - 498
  • [44] Effect of Process Parameters on the Automobile Part in Hot Stamping Process
    Ma, Wenyu
    Yao, Ye
    Yang, Jianwei
    Zhang, Jun
    Zhang, Yongqiang
    2020 4TH INTERNATIONAL CONFERENCE ON ELECTRICAL, AUTOMATION AND MECHANICAL ENGINEERING, 2020, 1626
  • [45] Optimization of concurrent criteria in the stamping process
    Oujebbour, Fatima-Zahra
    Habbal, Abderrahmane
    Ellaia, Rachid
    PROCEEDINGS OF 2013 INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND SYSTEMS MANAGEMENT (IEEE-IESM 2013), 2013, : 468 - 477
  • [46] Optimization of process parameters and performances of cryogenic cutting of magnesium alloy
    Fan L.
    Yan P.
    Chen S.
    Chen H.
    Jiao L.
    Qiu T.
    Wang X.
    Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2022, 54 (07): : 53 - 63and69
  • [48] Research on stamping formability and process simulation of AZ31 magnesium alloy based on deep learning
    Wang, Shuo
    Wu, Yan
    Xu, Qian
    Ma, Yanman
    Wang, Tianzhu
    MATERIALS TODAY COMMUNICATIONS, 2024, 40
  • [49] Formability and numerical simulation of AZ31B magnesium alloy sheet in warm stamping process
    Wang, Wurong
    Huang, Lei
    Tao, Kuangheng
    Chen, Shichao
    Wei, Xicheng
    MATERIALS & DESIGN, 2015, 87 : 835 - 844
  • [50] Optimization of aluminium sheet hot stamping process using a multi-objective stochastic approach
    Xiao, Wenchao
    Wang, Baoyu
    Zhou, Jing
    Ma, Wenyu
    Yang, Lei
    ENGINEERING OPTIMIZATION, 2016, 48 (12) : 2173 - 2189