Design of an adjustable cam based constant force mechanism

被引：35
作者：
Liu, Yang [1 ]
Yu, De-ping [1 ]
Yao, Jin [1 ]
机构：
[1] Sichuan Univ, Sch Mfg Sci & Engn, Chengdu 610065, Peoples R China
来源：
MECHANISM AND MACHINE THEORY | 2016年 / 103卷
关键词：
Adjustable constant force mechanism; Cam mechanism; Negative stiffness; NEGATIVE STIFFNESS ELEMENTS; MATING UNCERTAINTY; OPTIMIZATION; OUTPUT;
D O I：
10.1016/j.mechmachtheory.2016.04.014
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A novel adjustable constant force mechanism (ACFM), which mainly consists of a linear spring and a cam mechanism (CM), has been proposed to passively regulate contact force. The CM is a linear negative stiffness mechanism and the constant force can be derived by paralleling the CM and the linear spring. To obtain the linear negative stiffness characteristic of the CM, the cam profile has been designed in detail. The magnitude of the constant force can be adjusted by preloading the linear spring. The mathematical model of the proposed ACFM, which doesn't contain complicated flexible members, is simple and accurate. To verify feasibility of the theoretical design procedure of the cam profile, a simulation of the ACFM has been carried out in virtual simulation software and the simulation results are consistent with the theoretical design procedure. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：85 / 97
页数：13
相关论文
共 50 条
  • [31] Optimal design of a linkage-cam mechanism-based redundantly actuated parallel manipulator
    Wen, Haiying
    Cong, Ming
    Xu, Weiliang
    Zhang, Zhisheng
    Dai, Min
    FRONTIERS OF MECHANICAL ENGINEERING, 2021, 16 (03) : 451 - 467
  • [32] A Novel Design of Torsion Spring-Connected Nonlinear Stiffness Actuator Based on Cam Mechanism
    Qu, Xiangxu
    Cao, Dongxing
    Qu, Ruheng
    Zhang, Guyu
    Zhang, Shan
    JOURNAL OF MECHANICAL DESIGN, 2022, 144 (08)
  • [33] Experiment and Prediction of Grinding Force on the Design of a CAM Dental Restoration System
    Lei, Xiaobao
    Liao, Wenhe
    Dai, Ning
    Zhang, Lin
    MACHINING AND ADVANCED MANUFACTURING TECHNOLOGY X, 2010, 431-432 : 301 - 304
  • [34] Multidisciplinary Design Optimization of Distribution Cam Mechanism of Diesel Engine
    Li Lei
    Zhang Jianrun
    APPLIED MATHEMATICS & INFORMATION SCIENCES, 2013, 7 (05): : 1957 - 1962
  • [35] Research on Design Theory of Cam Type Torsional Transmission Mechanism
    Wang, Fanbi
    Zhang, Tieshan
    Li, Mingsong
    PROCEEDINGS OF THE 2016 INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS SCIENCE AND ENVIRONMENTAL ENGINEERING, 2016, 52 : 201 - 204
  • [36] A compliant constant-force mechanism with sub-Newton force and millimeter stroke output
    Lyu, Zekui
    Xu, Qingsong
    SENSORS AND ACTUATORS A-PHYSICAL, 2024, 374
  • [37] EXPLORE THE BEAUTY OF CAM GEOMETRY: THE NECESSARY AND SUFFICIENT DESIGN CONDITIONS FOR THE CAM MECHANISM WITH FLAT FACE FOLLOWER
    Chen, Yen-Nien
    Hsu, Kuan-Lun
    PROCEEDINGS OF ASME 2022 INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, IDETC-CIE2022, VOL 7, 2022,
  • [38] CAD of Parallel Indexing Cam Mechanism Based on Matlab
    Yan, Fan
    2011 AASRI CONFERENCE ON APPLIED INFORMATION TECHNOLOGY (AASRI-AIT 2011), VOL 1, 2011, : 222 - 224
  • [39] Dynamics Simulation of Cam Mechanism Based on Pro/E
    Liu Deliang
    Lu Huibiao
    Cao Shuhua
    Sun Ang
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MECHATRONICS, ELECTRONIC, INDUSTRIAL AND CONTROL ENGINEERING, 2015, 8 : 816 - 819
  • [40] Optimum Design of Motion Curve of Cam Mechanism with Lowest Maximum Acceleration
    Sun, Chuanqiong
    Ren, Aihua
    Sun, Guoxing
    ADVANCES IN POWER TRANSMISSION SCIENCE AND TECHNOLOGY, 2011, 86 : 666 - 669
12345