The CNT/PSt-EA/Kevlar composite with excellent ballistic performance

被引:64
作者
Cao, Saisai [1 ]
Pang, Haoming [1 ]
Zhao, Chunyu [1 ]
Xuan, Shouhu [1 ]
Gong, Xinglong [1 ]
机构
[1] USTC, CAS Ctr Excellence Complex Syst Mech, Dept Modern Mech, CAS Key Lab Mech Behav & Design Mat, Hefei 230027, Peoples R China
基金
中国国家自然科学基金;
关键词
fabrics/textiles; Nano particles; Impact behavior; Finite element analysis (FEA); Shear thickening fluid; SHEAR-THICKENING FLUID; YARN PULL-OUT; MECHANICAL-PROPERTIES; STAB RESISTANCE; IMPACT BEHAVIOR; FABRICS; STF; FRICTION; STRENGTH;
D O I
10.1016/j.compositesb.2020.107793
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This work reports a new type of ballistic composite which is prepared by integrating the carbon nanotubepolystyrene ethyl acrylate (CNT/PSt-EA) based shear thickening fluid (C-STF) with Kevlar fabric. Because the rheological property of the PSt-EA based STF is significantly enhanced by the CNT, the C-STF/Kevlar offers better ballistic property than Kevlar fabric. The ballistic test indicated that the ballistic limit velocity (v(bl)) of Kevlar could be improved from 84.6 m/s to 96.5 m/s by impregnating the C-STF. Here, the optimum addition of CNT for C-STF/Kevlar is 1.0% and excessive CNT addition reduces the reinforcement effect. Besides, as the volume fraction of dispersed phase in STF increased from 53.5% to 58.5%, the v(bl) increased from 92.9 m/s to 99.5 m/s. The fabric layer number also plays a critical role in the ballistic property of C-STF/Kevlar. By combining the finite element analysis (FEA) results of ballistic impact with the quasi-static puncture and yarn pull-out results, the enhanced anti-impact mechanism is obtained. It is found that the friction coefficient between the yarns is strengthened and the bearing area of the fabric is increased by doping STFs, thereby the ballistic performance of Kevlar is improved. This work achieves the regulation of ballistic performance of Kevlar composites.
引用
收藏
页数:9
相关论文
共 49 条
  • [1] High strain rate behavior of STF-treated UHMWPE composites
    Asija, Neelanchali
    Chouhan, Hemant
    Gebremeskel, Shishay Amare
    Singh, Rama Kant
    Bhatnagar, Naresh
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2017, 110 : 359 - 364
  • [2] Fundamental parameters affecting yarn-pullout behavior
    Badrossamay, MR
    Ravandi, SAH
    Morshed, M
    [J]. JOURNAL OF THE TEXTILE INSTITUTE, 2001, 92 (03) : 280 - 287
  • [3] Energy analysis of fabric impregnated by shear thickening fluid in yarn pullout test
    Bai, Ruixiang
    Ma, Yu
    Lei, Zhenkun
    Feng, Yang
    Liu, Chen
    [J]. COMPOSITES PART B-ENGINEERING, 2019, 174
  • [4] SHEAR-THICKENING (DILATANCY) IN SUSPENSIONS OF NONAGGREGATING SOLID PARTICLES DISPERSED IN NEWTONIAN LIQUIDS
    BARNES, HA
    [J]. JOURNAL OF RHEOLOGY, 1989, 33 (02) : 329 - 366
  • [5] Two-dimensional (2D) fabrics and three-dimensional (3D) preforms for ballistic and stabbing protection: A review
    Bilisik, Kadir
    [J]. TEXTILE RESEARCH JOURNAL, 2017, 87 (18) : 2275 - 2304
  • [6] Shear thickening in concentrated suspensions: phenomenology, mechanisms and relations to jamming
    Brown, Eric
    Jaeger, Heinrich M.
    [J]. REPORTS ON PROGRESS IN PHYSICS, 2014, 77 (04)
  • [7] Stress relaxation in the transition from shear thinning to shear jamming in shear thickening fluid
    Cao, Saisai
    He, Qianyun
    Pang, Haoming
    Chen, Kaihui
    Jiang, Wanquan
    Gong, Xinglong
    [J]. SMART MATERIALS AND STRUCTURES, 2018, 27 (08)
  • [8] High strain-rate dynamic mechanical properties of Kevlar fabrics impregnated with shear thickening fluid
    Cao, Saisai
    Chen, Qian
    Wang, Yunpeng
    Xuan, Shouhu
    Jiang, Wanquan
    Gong, Xinglong
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2017, 100 : 161 - 169
  • [9] An analytical model for ballistic impact on textile based body armour
    Chen, Xiaogang
    Zhu, Fuyou
    Wells, Garry
    [J]. COMPOSITES PART B-ENGINEERING, 2013, 45 (01) : 1508 - 1514
  • [10] Numerical study of inter-yarn friction on the failure of fabrics upon ballistic impacts
    Chu, Yanyan
    Min, Shengnan
    Chen, Xiaogang
    [J]. MATERIALS & DESIGN, 2017, 115 : 299 - 316