Examination of the Tensile Deformation Resistance and Ductility of Friction Stir Processed Al-Cu 2218 Alloy at Elevated Temperatures

被引：3

作者：

Chen, Ssu-Ta ^{[1
]}

Lui, Truan-Sheng ^{[1
]}

Chen, Li-Hui ^{[1
]}

机构：

[1] Natl Cheng Kung Univ, Dept Mat Sci & Engn, Tainan 70101, Taiwan

来源：

MATERIALS TRANSACTIONS | 2010年 / 51卷 / 08期

关键词：

friction stir process; microstructural homogeneity; tensile ductility; grain boundary sliding; ALUMINUM; PRECIPITATION; STABILITY; PROPERTY; WELDS;

D O I：

10.2320/matertrans.M2010111

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Tensile properties dependence of elevated testing temperatures (100 degrees C similar to 450 degrees C) on as extruded and as friction stir processed Al-Cu 2218 alloy were investigated. The tensile deformation resistance of an as friction stir processed sample is higher than an as extruded one as increased testing temperature up to 300 degrees C and this is a consequence of natural aging effect. However, the tensile deformation resistance decreased evidently as the testing temperature raised to 400 degrees C similar to 450 degrees C, meanwhile there was a concomitant improvement of tensile ductility due to a homogeneously grain refinement which facilitated a pronounced grain boundary sliding in this temperature range. [doi:10.2320/matertrans.M20101]

引用

页码：1474 / 1480

页数：7

共 37 条

[21] Hall-Petch Tensile Yield Stress and Grain Size Relation of Al-5Mg-0.5Mn Alloy in Friction-Stir-Processed and Post-Thermal-Exposed Conditions
Lin, Chun-Yi
Lui, Truan-Sheng
Chen, Li-Hui
Hung, Fei-Yi
MATERIALS TRANSACTIONS, 2014, 55 (02) : 357 - 362
[22] Effect of initial butt surface on tensile properties and fracture behavior of friction stir welded Al-Zn-Mg-Cu alloy
Ren, S. R.
Ma, Z. Y.
Chen, L. Q.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 479 (1-2): : 293 - 299
[23] Microstructure, mechanical properties and thermal stability of friction-stir-processed Al-Cu-Mg-Ag alloy
Yu, Zhe
Qiu, Junqi
Li, He
Cai, Pengzhan
Zhang, Ling
Fu, Xiaoxiao
Wang, Jinsan
Xiao, Namin
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 863
[24] Selection of best process parameters for friction stir welded dissimilar Al-Cu alloy: a novel MCDM amalgamated MORSM approach
Medhi, Tanmoy
Hussain, Syed Abou Iltaf
Roy, Barnik Saha
Saha, Subhash Chandra
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2020, 42 (10)
[25] Effect of abnormal grain growth on tensile strength of Al-Cu-Mg alloy friction stir welded joints
Safarkhanian, M. A.
Goodarzi, M.
Boutorabi, S. M. A.
JOURNAL OF MATERIALS SCIENCE, 2009, 44 (20) : 5452 - 5458
[26] Effect of rolling deformation on microstructure and tensile properties of additively manufactured Al-Cu alloy with thermo-mechanical treatment
Zhang, Tao
Qin, Zhenyang
Gong, Hai
Wu, Yunxin
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2024, 24 (04)
[27] Relationship between deformation behavior and microstructural evolution of friction stir processed Zn-22 wt.% Al alloy
Hirata, Tomotake
Tanaka, Tsutomu
Chung, Sung Wook
Takigawa, Yorinobu
Higashi, Kenji
SCRIPTA MATERIALIA, 2007, 56 (06) : 477 - 480
[28] Fatigue lifetime and tearing resistance of AA2198 Al-Cu-Li alloy friction stir welds: Effect of defects
Le Jolu, T.
Morgeneyer, T. F.
Denquin, A.
Gourgues-Lorenzon, A. F.
INTERNATIONAL JOURNAL OF FATIGUE, 2015, 70 : 463 - 472
[29] Microstructure and tensile response of friction stir welded Al-Cu-Li (AA2198-T8) alloy
Nayan, Niraj
Yadava, Manasij
Sarkar, Rajdeep
Murty, S. V. S. Narayana
Gurao, N. P.
Mahesh, Sivasambu
Prasad, M. J. N., V
Samajdar, I
MATERIALS CHARACTERIZATION, 2020, 159
[30] Refinement of precipitates and deformation substructure in an Al-Cu-Li alloy during heavy rolling at elevated temperatures
Munoz-Morris, M. A.
Gutierrez-Urrutia, I.
Calderon, N.
Morris, D. G.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 492 (1-2): : 268 - 275

← 1 2 3 4 →