Controller Design of Servo Drives for Bandwidth Improvement

被引:0
|
作者
Ho, Min-Hsien [1 ]
Lai, Yen-Shin [1 ]
机构
[1] Natl Taipei Univ Technol, Dept Elect Engn, Taipei, Taiwan
关键词
servo motor drives; bandwidth; servo controller;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The controller design of servo drives for bandwidth improvement will presented in this paper. The delay issues caused by calculation, filter and PWM generation, etc. are addressed. The controllers of current loop, speed loop and position loop are designed considering the delay and phase margin. Experimental results show the bandwidth for current, speed and position loops of servo drives are significantly improved as compared to those using conventional methods. For the servo drives with switching frequency of 20 kHz, as compared to traditional design method, the achievable control bandwidth for the presented method of position control loop is improved from 20 Hz to 116 Hz.
引用
收藏
页码:52 / 56
页数:5
相关论文
共 50 条
  • [1] Servo controller design for high-bandwidth HDDs
    Suh, SM
    Chung, CC
    Lee, SH
    IEEE TRANSACTIONS ON MAGNETICS, 2002, 38 (05) : 2177 - 2179
  • [2] On the Control Bandwidth of Servo Drives
    Boecker, Joachim
    Beineke, Stephan
    Baehr, Alexander
    EPE: 2009 13TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS, VOLS 1-9, 2009, : 5389 - 5398
  • [3] Design and implementation of a digitalized fuzzy controller for DC servo drives
    Lu, HC
    1997 IEEE INTERNATIONAL CONFERENCE ON INTELLIGENT PROCESSING SYSTEMS, VOLS 1 & 2, 1997, : 242 - 246
  • [4] Design of robust optimal PI controller for PMSM servo drives
    Lourde, R.Mary
    Umanand, L.
    Rao, N.J.
    Journal of the Indian Institute of Science, 1997, 77 (05): : 469 - 489
  • [5] A higher bandwidth servo design with strain feedback control for magnetic disk drives
    Nakagawa, S
    Kobayashi, M
    Yamaguchi, T
    PROCEEDINGS OF THE 2003 AMERICAN CONTROL CONFERENCE, VOLS 1-6, 2003, : 2547 - 2552
  • [6] Servo bandwidth and positioning accuracy design for high track density disk drives
    Yamaguchi, T
    Usui, K
    Okuyama, A
    Yasuna, K
    Akagi, K
    Shishida, K
    IEEE TRANSACTIONS ON MAGNETICS, 2000, 36 (05) : 2216 - 2218
  • [7] Design and implementation of a high bandwidth servo controller for micro-machining center
    Ko, Roy Chih-Lung
    Liu, Wang-Lin
    PROCEEDINGS OF THE ASME INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND ENGINEERING - 2007, 2007, : 743 - 750
  • [8] Track following servo design for tape drives using estimator-controller technique
    Panda, SP
    Trabert, SG
    PROCEEDINGS OF THE 2003 AMERICAN CONTROL CONFERENCE, VOLS 1-6, 2003, : 1349 - 1355
  • [9] Design of a digital servo controller
    Sun, C
    Liu, YK
    Jin, CR
    ICEMI 2005: Conference Proceedings of the Seventh International Conference on Electronic Measurement & Instruments, Vol 2, 2005, : 401 - 404