A Numerical and Experimental Investigation of Dimple Effects on Heat Transfer Enhancement with Impinging Jets

被引：9

作者：

Sriromreun, Parkpoom ^{[1
]}

Sriromreun, Paranee ^{[2
]}

机构：

[1] Srinakharinwirot Univ, Dept Mech Engn, Fac Engn, Ongkharak 26120, Nakhonnayok, Thailand

[2] Srinakharinwirot Univ, Dept Chem Engn, Fac Engn, Ongkharak 26120, Nakhonnayok, Thailand

来源：

ENERGIES | 2019年 / 12卷 / 05期

关键词：

impinging jet; dimple; Nusselt number; heat transfer; heat exchanger; FLAT;

D O I：

10.3390/en12050813

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

This research was aimed at studying the numerical and experimental characteristics of the air flow impinging on a dimpled surface. Heat transfer enhancement between a hot surface and the air is supposed to be obtained from a dimple effect. In the experiment, 15 types of test plate were investigated at different distances between the jet and test plate (B), dimple diameter (d) and dimple distance (E-r and E). The testing fluid was air presented in an impinging jet flowing at Re = 1500 to 14,600. A comparison of the heat transfer coefficient was performed between the jet impingement on the dimpled surface and the flat plate. The velocity vector and the temperature contour showed the different air flow characteristics from different test plates. The highest thermal enhancement factor (TEF) was observed under the conditions of B = 2 d, d = 1 cm, E-r= 2 d, E = 1.5 d and Re = 1500. This TEF was obtained from the dimpled surface and was 5.5 times higher than that observed in the flat plate.

引用

页数：16

共 27 条

[1] Flow Structure and Heat Transfer of Jet Impingement on a Rib-Roughened Flat Plate [J].

Alenezi, Abdulrahman H. ;

Almutairi, Abdulrahman ;

Alhajeri, Hamad M. ;

Addali, Abdulmajid ;

Gamil, Abdelaziz A. A. .

ENERGIES, 2018, 11 (06)

[2]

Bergman TheodoreL., 2007, Introduction to Heat Transfer, V6Th

[3] Heat transfer characteristics of synthetic jet impingement cooling [J].

Chaudhari, Mangesh ;

Puranik, Bhalchandra ;

Agrawal, Amit .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (5-6) :1057-1069

[4] An experimental study of the local evolution of moist substrates under jet impingement drying [J].

De Bonis, Maria Valeria ;

Ruocco, Gianpaolo .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2011, 50 (01) :81-87

[5] Analysis of heat transfer and flow characteristics in turbulent impinging jet [J].

Draksler, Martin ;

Koncar, Bostjan .

NUCLEAR ENGINEERING AND DESIGN, 2011, 241 (04) :1248-1254

[6] Jet impingement heat transfer on dimpled target surfaces [J].

Ekkad, SV ;

Kontrovitz, D .

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2002, 23 (01) :22-28

[7] Effects of hole spacing on spatially-resolved jet array impingement heat transfer [J].

Goodro, Matt ;

Park, Jongmyung ;

Ligrani, Phil ;

Fox, Mike ;

Moon, Hee-Koo .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2008, 51 (25-26) :6243-6253

[8] The near wall behavior of an impinging jet [J].

Guerra, DRS ;

Su, J ;

Freire, APS .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2005, 48 (14) :2829-2840

[9] Heat transfer correlations of perpendicularly impinging jets on a hemispherical-dimpled surface [J].

Kanokjaruvijit, Koonlaya ;

Martinez-Botas, Ricardo F. .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (15-16) :3045-3056

[10] Measurement of local heat/mass transfer coefficients on a dimple using naphthalene sublimation [J].

Kwon, Hyun Goo ;

Hwang, Sang Dong ;

Cho, Hyung Hee .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2011, 54 (5-6) :1071-1080

← 1 2 3 →