Interlaminar contact resistivity and its influence on eddy currents in carbon fiber reinforced polymer laminates

被引:35
作者
Xu, Xiaojuan [1 ]
Ji, Hongli [1 ]
Qiu, Jinhao [1 ]
Cheng, Jun [2 ]
Wu, Yipeng [1 ]
Takagi, Toshiyuki [3 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, State Key Lab Mech & Control Mech Struct, Nanjing 210016, Jiangsu, Peoples R China
[2] Nanjing Normal Univ, Sch Elect & Automat Engn, Nanjing 210016, Jiangsu, Peoples R China
[3] Tohoku Univ, Inst Fluid Sci, Sendai, Miyagi 980, Japan
关键词
Contact resistivity; CFRP; Eddy current; Electrodes size; RESISTANCE CHANGE METHOD; ANISOTROPIC COMPOSITE-MATERIALS; MATRIX COMPOSITES; ELECTRIC CONDUCTANCE; DELAMINATION; INTERFACE; DAMAGE; ENHANCEMENT; SENSOR;
D O I
10.1016/j.ndteint.2017.12.003
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this study, contact resistivity of interlaminar interface and its influence on eddy currents in carbon fiber reinforced polymer (CFRP) laminates were thoroughly investigated. Measurements of the contact resistivity between the adjacent laminae were conducted experimentally, together with the anisotropic bulk conductivity of a single-layer lamina. The measured values were then used in finite element (FE) models to study the influence of the contact resistivity on eddy currents in CFRP laminates. It was found that eddy currents are highly concentrated around the laminae interfaces when contact resistivity is taken into account, while the currents experience a steep drop in a non-contact model. The FE results were verified by comparing the calculated voltages with the experimentally measured ones. In addition, effects of electrodes size on the electric potential in CFRP were numerically analyzed. It was observed that electric potential diffuses due to the electrical anisotropy in CFRP, and thus the visible electrodes area is not the effective one.
引用
收藏
页码:79 / 91
页数:13
相关论文
共 37 条
  • [1] In-situ monitoring of damage in CFRP laminates by means of AC and DC measurements
    Abry, JC
    Choi, YK
    Chateauminois, A
    Dalloz, B
    Giraud, G
    Salvia, M
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (06) : 855 - 864
  • [2] The electrical resistance response of continuous carbon fibre composite laminates to mechanical strain
    Angelidis, N
    Wei, CY
    Irving, PE
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2004, 35 (10) : 1135 - 1147
  • [3] Electromagnetic and thermal behaviors of multilayer anisotropic composite materials
    Bensaid, S
    Trichet, D
    Fouladgar, J
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2006, 42 (04) : 995 - 998
  • [4] 3-D simulation of induction heating of anisotropic composite materials
    Bensaid, S
    Trichet, D
    Fouladgar, J
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2005, 41 (05) : 1568 - 1571
  • [5] Role of interlaminar interface on bulk conductivity and electrical anisotropy of CFRP laminates measured by eddy current method
    Cheng, Jun
    Ji, Hongli
    Qiu, Jinhao
    Takagi, Toshiyuki
    Uchimoto, Tetsuya
    Hu, Ning
    [J]. NDT & E INTERNATIONAL, 2014, 68 : 1 - 12
  • [6] Numerical analysis of correlation between fibre orientation and eddy current testing signals of carbon-fibre reinforced polymer composites
    Cheng, Jun
    Qiu, Jinhao
    Takagi, Toshiyuki
    Uchimoto, Tetsuya
    Hu, Ning
    [J]. INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2012, 39 (1-4) : 251 - 259
  • [7] Interlaminar interface relaxation upon heating carbon fiber thermoplastic-matrix composite, studied by contact electrical resistivity measurement
    Guerrero, VH
    Chung, DDL
    [J]. COMPOSITE INTERFACES, 2002, 9 (06) : 557 - 563
  • [8] Analyzing carbon-fiber composite materials with equivalent-layer models
    Holloway, CL
    Sarto, MS
    Johansson, M
    [J]. IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 2005, 47 (04) : 833 - 844
  • [9] Near electrical resonance signal enhancement (NERSE) in eddy-current crack detection
    Hughes, R.
    Fan, Y.
    Dixon, S.
    [J]. NDT & E INTERNATIONAL, 2014, 66 : 82 - 89
  • [10] Fatigue damage characterization in carbon fibre composite materials using an electrical potential technique
    Irving, PE
    Thiagarajan, C
    [J]. SMART MATERIALS & STRUCTURES, 1998, 7 (04) : 456 - 466