Biomechanical and bioactivity concepts of polyetheretherketone composites for use in orthopedic implantsa review

被引:98
作者
Abdullah, Mohamed Ruslan [1 ]
Goharian, Amirhossein [2 ,3 ]
Kadir, Mohammed Rafiq Abdul [2 ]
Wahit, Mat Uzir [4 ]
机构
[1] Univ Teknol Malaysia, Dept Appl Mech & Design, Ctr Composites, Skudai 81310, Johor, Malaysia
[2] Univ Teknol Malaysia, Fac Biosci & Med Engn, Med Devices & Technol Grp, Skudai 81310, Johor, Malaysia
[3] Leonix Sdn Bhd, R&D Dept, George Town 11960, Malaysia
[4] Univ Teknol Malaysia, Inst Vehicle Syst & Engn IVeSE, Ctr Composites, Skudai 81310, Johor, Malaysia
关键词
polyetheretherketone; biomechanical; bioactivity; orthopedic implants; FIBER-REINFORCED POLYETHERETHERKETONE; CALCIUM-PHOSPHATE COATINGS; IN-VIVO BIOCOMPATIBILITY; PROXIMAL TIBIA FRACTURES; MECHANICAL-PROPERTIES; PLATE FIXATION; DISTAL RADIUS; TRIBOLOGICAL ASSESSMENT; RECONSTRUCTION PLATE; CLINICAL-EXPERIENCE;
D O I
10.1002/jbm.a.35480
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
The use of polyetheretherketone (PEEK) composites in the trauma plating system, total replacement implants, and tissue scaffolds has found great interest among researchers. In recent years (2008 afterward), this type of composites has been examined for suitability as substitute material over stainless steel, titanium alloys, ultra high molecular weight polyethylene, or even biodegradable materials in orthopedic implant applications. Biomechanical and bioactivity concepts were contemplated for the development of PEEK orthopedic implants and a few primary clinical studies reported the clinical outcomes of PEEK-based orthopedic implants. This study aims to review and discuss the recent concepts and contribute further concepts in terms of biomechanical and bioactivity challenges for the development of PEEK and PEEK composites in orthopedic implants. (c) 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 103A: 3689-3702, 2015.
引用
收藏
页码:3689 / 3702
页数:14
相关论文
共 136 条
[1]  
Abdullah MR, 2014, J APPL POLYM SCI, V131, DOI [10.1002/APP.40915, 10.1002/app.40915]
[2]   Tensile properties, tension-tension fatigue and biological response of polyetheretherketone-hydroxyapatite composites for load-bearing orthopedic implants [J].
Abu Bakar, MS ;
Cheng, MHW ;
Tang, SM ;
Yu, SC ;
Liao, K ;
Tan, CT ;
Khor, KA ;
Cheang, P .
BIOMATERIALS, 2003, 24 (13) :2245-2250
[3]   Third tubular versus 3.5-mm dynamic compression plates for fixation of diaphyseal fractures of the ulna: a prospective randomized trial [J].
Alkhayarin, Mohammed ;
Said, Mohammed Nader .
EUROPEAN JOURNAL OF ORTHOPAEDIC SURGERY AND TRAUMATOLOGY, 2012, 22 (07) :561-564
[4]   Reconstruction plate versus minimal invasive retrograde titanium elastic nail fixation for displaced midclavicular fractures [J].
Assobhi J.E.H. .
Journal of Orthopaedics and Traumatology, 2011, 12 (4) :185-192
[5]   Cell Adhesion to PEEK Treated by Plasma Immersion Ion Implantation and Deposition for Active Medical Implants [J].
Awaja, Firas ;
Bax, Daniel V. ;
Zhang, Shengnan ;
James, Natalie ;
McKenzie, David R. .
PLASMA PROCESSES AND POLYMERS, 2012, 9 (04) :355-362
[6]   Three-year results of proximal tibia fractures treated with the LISS [J].
Boldin, Christian ;
Fankhauser, Florian ;
Hofer, Herwig Peter ;
Szyszkowitz, Rudolf .
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH, 2006, (445) :222-229
[7]   Composite based on polyetheretherketone reinforced with carbon fibres, an alternative to conventional materials for femoral implant: Manufacturing process and resulting structural behaviour [J].
Boudeau, N. ;
Liksonov, D. ;
Barriere, T. ;
Maslov, L. ;
Gelin, J. -C. .
MATERIALS & DESIGN, 2012, 40 :148-156
[8]   Wear of ceramic-on-carbon fiber-reinforced poly-ether ether ketone hip replacements [J].
Brockett, Claire L. ;
John, Gemma ;
Williams, Sophie ;
Jin, Zhongmin ;
Isaac, Graham H. ;
Fisher, John .
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2012, 100B (06) :1459-1465
[9]   CHARACTERIZATION OF SHORT-FIBER REINFORCED THERMOPLASTICS FOR FRACTURE FIXATION DEVICES [J].
BROWN, SA ;
HASTINGS, RS ;
MASON, JJ ;
MOET, A .
BIOMATERIALS, 1990, 11 (08) :541-547
[10]  
Budassi P, 2012, MAGAZINE LIMA CORPOR, V21, P4