Effect of Austenitizing Temperature on Pearlite Transformation of a Medium-Carbon Steel

被引：1
|
作者：
Wu, G. H. [1 ]
Wu, K. M. [1 ]
Isayev, O. [1 ]
Hress, O. [1 ]
Yershov, S. [1 ]
Tsepelev, V [2 ]
机构：
[1] Wuhan Univ Sci & Technol, State Key Lab Refractories & Met, Int Res Inst Steel Technol, Wuhan, Hubei, Peoples R China
[2] Ural Fed Univ, Ctr Liquid Met Phys, Ekaterinburg, Russia
来源：
METALLURGIST | 2019年 / 62卷 / 9-10期
关键词：
steel; phase transformation; pearlite; bainite; microstructure; Q-AND-P;
D O I：
10.1007/s11015-019-00756-4
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Pearlite transformation is a necessary step in the production of ultra-high strength wires and nanostructured bainitic steels. The initial austenite grain size has an important influence on the bainite and pearlite transformation. The effect of austenitizing temperature on the austenite-to-pearlite transformation in a medium-carbon steel was investigated by using a Gleeble 1500 simulator. The initial austenite grains coarsened from 33.7 to 68.5 m when the austenitizing temperature increased from 850 degrees C to 1100 degrees C. The phase-volume percentage and interlamellar spacing of the pearlitic microstructure decreased from 86.6% to 5.2%, and from 114 nm to 110 nm, respectively, in the same austenitizing temperature range. The starting temperature of the pearlite transformation was inversely proportional to the austenitizing temperature. The pearlite-transformation temperature range (43-48 degrees C) did not change visibly with austenitizing temperature. The Vickers hardness of the transformed microstructure (pearlite + martensite) was proportional to the austenitizing temperature.
引用
收藏
页码：1073 / 1080
页数：8
相关论文
共 50 条
  • [1] Effect of Austenitizing Temperature on Pearlite Transformation of a Medium-Carbon Steel
    G. H. Wu
    K. M. Wu
    O. Isayev
    O. Hress
    S. Yershov
    V. Tsepelev
    Metallurgist, 2019, 62 : 1073 - 1080
  • [2] Effect of niobium on pearlite transformation in medium-carbon Si-Mn spring steel
    Xiao, Jin-Fu
    Liu, Ya-Zheng
    Sun, Jing-Hong
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2010, 32 (12): : 1564 - 1568
  • [3] Low-Temperature Carbide Transformation in Pearlite of Medium-Carbon Steels
    Davydov S.V.
    Davydov, S.V. (fulleren_grafen@mail.ru), 1600, Pleiades journals (50): : 639 - 647
  • [4] Low-temperature transformation to bainite in a medium-carbon steel
    Peet, Mathew J.
    Hasan, Hala S.
    Avettand-Fenoel, Marie-Noelle
    Raubye, Saud H. A.
    Bhadeshia, Harshad K. D. H.
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2017, 108 (02) : 89 - 98
  • [5] SPHEROIDIZATION OF PEARLITE IN A COLD DEFORMED MEDIUM-CARBON STEEL.
    Goodchild, D.
    1600, (01):
  • [6] Effect of Quenching Temperature on Microstructure and Mechanical Properties of Medium-Carbon Steel
    Ramadan N. Elshaer
    Khaled M. Ibrahim
    Mervat M. Ibrahim
    Arafa S. Sobh
    Metallography, Microstructure, and Analysis, 2021, 10 : 485 - 495
  • [7] EFFECT OF AUSTENITIZING TEMPERATURE ON THE FERRITE TRANSFORMATION IN A HSLA STEEL
    PRASAD, SN
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1990, 43 (02): : 109 - 113
  • [8] Effect of Quenching Temperature on Microstructure and Mechanical Properties of Medium-Carbon Steel
    Elshaer, Ramadan N.
    Ibrahim, Khaled M.
    Ibrahim, Mervat M.
    Sobh, Arafa S.
    METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2021, 10 (04) : 485 - 495
  • [9] Effect of time and low temperature on physical properties of medium-carbon steel
    Reinhardt, GA
    Cutler, HJ
    TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1920, 62 : 420 - 427
  • [10] Effects of Isothermal Transformation at the Quenching Temperature on the Microstructure and Mechanical Properties of a Medium-Carbon Steel
    Jisheng Guan
    Man Liu
    Junyu Tian
    Zhenye Chen
    Guang Xu
    Transactions of the Indian Institute of Metals, 2021, 74 : 3265 - 3272
12345