Modeling the oxidative degradation of ultra-high-molecular-weight polyethylene

被引:10
作者
Medhekar, V
Thompson, RW
Wang, AU
McGimpsey, WG
机构
[1] Worcester Polytech Inst, Dept Chem Engn, Worcester, MA 01609 USA
[2] Stryker Howmedica Osteon, Mahwah, NJ 07430 USA
[3] Worcester Polytech Inst, Dept Chem & Biochem, Worcester, MA 01609 USA
关键词
polyethylene (PE); degradation; ageing;
D O I
10.1002/app.11470
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Understanding the sequence of reactions that occur in ultra-high-molecular-weight polyethylene (UHMWPE) following (60)Co gamma irradiation has been the focus of numerous experimental studies. In the study reported here, we have incorporated recent experimental findings into a mathematical model for UHMWPE oxidation. Simulation results for shelf aging and accelerated aging are presented. It is shown that very reasonable simulations of shelfaging and accelerated-aging data can be obtained. It is also shown that simulations of shelf aging in reduced oxygen environments predict that the subsurface peaks of ketones will be shifted to the exterior surface. In vivo aging can be simulated if we assume that the oxygen level in the synovial fluid is about one-eighth that of atmospheric levels. Some reduced irradiation doses are predicted to significantly reduce the ketone formation for shelf-aging periods of up to 10 years. (C) 2002 Wiley Periodicals, Inc.
引用
收藏
页码:814 / 826
页数:13
相关论文
共 50 条
[31]   Isolation of a thermophilic bacterium capable of low-molecular-weight polyethylene degradation [J].
Jeon, Hyun Jeong ;
Kim, Mal Nam .
BIODEGRADATION, 2013, 24 (01) :89-98
[32]   Ultra-High Molecular Weight Polyethylene: Influence of the Chemical, Physical and Mechanical Properties on the Wear Behavior. A Review [J].
Bracco, Pierangiola ;
Bellare, Anuj ;
Bistolfi, Alessandro ;
Affatato, Saverio .
MATERIALS, 2017, 10 (07)
[33]   Regulating the dissolving system of ultra-high molecular weight polyethylene to enhance the high-strength and high-modulus properties of resultant fibers [J].
Wang, Yi ;
Fu, Jiabin ;
Song, Qingquan ;
Yu, Junrong ;
Wang, Yan ;
Hu, Zuming .
JOURNAL OF APPLIED POLYMER SCIENCE, 2022, 139 (29)
[34]   Thermal and mechanical properties of ultrahigh molecular weight polyethylene/high-density polyethylene/polyethylene glycol blends [J].
Ahmad, Mazatusziha ;
Wahit, Mat Uzir ;
Kadir, Mohammed Rafiq Abdul ;
Dahlan, Khairul Zaman Mohd ;
Jawaid, Mohammad .
JOURNAL OF POLYMER ENGINEERING, 2013, 33 (07) :599-614
[35]   Analysis of released products from oxidized ultra-high molecular weight polyethylene incubated with hydrogen peroxide and salt solutions [J].
Lee, AW ;
Santerre, JP ;
Boynton, E .
BIOMATERIALS, 2000, 21 (08) :851-861
[36]   Photons transport through ultra-high molecular weight polyethylene based composite containing tungsten and boron carbide fillers [J].
Ivanov, S. M. ;
Kuznetsov, S. A. ;
Volkov, A. E. ;
Terekhin, P. N. ;
Dmitriev, S. V. ;
Tcherdyntsev, V. V. ;
Gorshenkov, M. V. ;
Boykov, A. A. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 586 :S455-S458
[37]   Studies on electron-beam irradiation and plastic deformation of medical-grade ultra-high molecular weight polyethylene [J].
Czaja, Krystyna ;
Sudol, Marek .
RADIATION PHYSICS AND CHEMISTRY, 2011, 80 (03) :514-521
[38]   Effect of electron beam irradiation and plastic deformation on molar mass of medical grade ultra-high molecular weight polyethylene [J].
Sudol, Marek ;
Czaja, Krystyna .
POLIMERY, 2010, 55 (11-12) :890-894
[39]   Service life characterization of orthopedic implant material made of ultra-high molecular weight polyethylene under physiological conditions [J].
Wegner, Nils ;
Scholz, Ronja ;
Knyazeva, Marina ;
Walther, Frank .
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2020, 104
[40]   High-Precision Monitoring of Average Molecular Weight of Polyethylene Wax from Waste High-Density Polyethylene [J].
Guo, Zhouchao ;
Lan, Xia ;
Xue, Ping .
POLYMERS, 2020, 12 (01)