Residual strength analysis using CTOA criteria for fuselage structures containing multiple site damage

An extensive experimental program was conducted by the Boeing Company under the funding of the Federal Aviation Administration (FAA), National Aeronautics and Space Administration (NASA), and the United States Air Force Research Laboratory (USAF/RL) to investigate the effects of multiple-site damage (MSD) on the residual strength of typical fuselage splice joints. The experimental results were used to validate the analytical prediction using various methodologies, including STAGS (a generalized shell finite element code) with the crack-tip-opening angle and T* fracture criteria. The test specimens consisted of large flat panels, curved panels, and an aft pressure bulkhead. The flat panel specimens included three types of longitudinal splice joints and one type of circumferential splice joint. For each type, one panel contained only a lead crack and the other two panels contained MSD 1.3 and 2.5 mm in size, respectively, at the fastener holes ahead of the lead crack. The curved panels were tested under simulated loads of combined cabin pressure and fuselage down bending. Two skin splice types were tested. For each splice type, one panel contained a lead crack only and the other had a lead crack with various sizes of MSD. A section of an aft fuselage containing a large lead crack and MSD in the pressure dome was also tested to demonstrate the capabilities of the methodologies in analyzing actual aircraft structures. This paper presents the analytical approaches and the comparison of predictions with the experimental results in terms of crack linkup stress and residual strength. (C) 2002 Published by Elsevier Science Ltd.