Parameter study for a dimple location in a space grid under the critical impact load

The spacer grid assembly, an interconnected array of slotted grid straps embossed with dimples and springs, is one of the main structural components of a pressurized light-water reactor (PWR). It takes the role of supporting the nuclear fuel rods which experience a severe expansion and contraction caused by harsh operational conditions such as an earthquake. The external load by an earthquake can be mainly represented as a lateral load, and the resistance to it is evaluated in terms of dynamic crush strengths. It has been reported that a dimple location in a space grid has an effect on this strength. In this paper, based on this fact, the effect of a dimple location in a 3x3 support grid on impact strength has been investigated as a preliminary parameter study for a full sized support grid. The optimal location of the dimple, about 3.5 mm from the tip of the strap, has been found and some design guidelines for a support grid such as reducing the spring length and the dimple gap have been provided.