The Numerical Simulation of Rapidly Solidified Cu-Cr Alloys

被引：3
|
作者：
Zhou, Z. M. [1 ]
Xiao, Z. P. [1 ]
Wei, B. W. [1 ]
Hu, Y. [1 ]
Tang, L. W. [1 ]
Liu, C. [1 ]
机构：
[1] Chongqing Univ Technol, Sch Mat Sci & Engn, Chongqing 400054, Peoples R China
来源：
2012 INTERNATIONAL WORKSHOP ON INFORMATION AND ELECTRONICS ENGINEERING | 2012年 / 29卷
关键词：
Cu-Cr alloys; cooling rate; rapid solidification; simulation; MICROSTRUCTURE;
D O I：
10.1016/j.proeng.2012.01.599
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The simulation of rapidly solidified Cu-Cr alloys was studied in this paper. The rapidly solidified Cu-Cr alloys can be approximately modeled by one-dimensional heat conduction equation. The temperature distribution and the cooling rate of rapidly solidified Cu-Cr alloys are determined by integration of the equation. The cooling rate is inverse proportion to the square of the thickness of the alloys. The thermal diffusivity of the Cu-Cr melt and the coefficient of thermal storage of the cooling copper mediator are the most important factors that decide teh cooling rate of the alloys. The simulative results are coincident very well with the experimental results for the microstructure of rapid solidified Cu-Cr alloys prepared by melt-spinning. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of Harbin University of Science and Technology
引用
收藏
页码：3944 / 3948
页数：5
相关论文
共 50 条
  • [1] Synthesis, microstructure, and hardness of rapidly solidified Cu-Cr alloys
    Garzon-Manjon, A.
    Christiansen, L.
    Kirchlechner, I.
    Breitbach, B.
    Liebscher, C. H.
    Springer, H.
    Dehm, G.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 794 : 203 - 209
  • [2] Surface precipitation of chromium in rapidly solidified Cu-Cr alloys
    Bizjak, Milan
    Karpe, Balz
    Jaksa, Gregor
    Kovac, Janez
    APPLIED SURFACE SCIENCE, 2013, 277 : 83 - 87
  • [3] Coherent strengthening of aging precipitation in rapidly solidified Cu-Cr alloy
    Liu, P
    Kang, BX
    Cao, XG
    Huang, JL
    Gu, HC
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 1999, 9 (04) : 723 - 727
  • [4] Coherent strengthening of aging precipitation in rapidly solidified Cu-Cr alloy
    刘平
    康布熙
    曹兴国
    黄金亮
    顾海澄
    TransactionsofNonferrousMetalsSocietyofChina, 1999, (04) : 723 - 727
  • [5] Microstructure of rapidly solidified Cu-25 wt.% Cr alloys
    Zhou, ZM
    Wang, YP
    Gao, J
    Kolbe, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 398 (1-2): : 318 - 322
  • [6] Study of rapidly solidified Cu-Cr-RE alloys
    Xie, Ming
    Liu, Jianliang
    Lu, Xianyong
    Shi, An
    Den, Zhongmin
    Jang, Heng
    Zheng, Fuqian
    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2001, 2 (01) : 79 - 82
  • [7] Solidification microstructure of Cu-Cr and Cu-Cr-In alloys
    Zhu, Yunqing
    Liao, Jinfa
    Chen, Huiming
    Wang, Hang
    Yang, Bin
    MATERIALS RESEARCH EXPRESS, 2020, 7 (04)
  • [8] Solidification Structure of Cu-Cr and Cu-Cr-Zr Alloys
    Tanaka, Shinji
    Mizusawa, Mamoru
    Miyabe, Yoshiharu
    Hagisawa, Takehito
    Kajikawa, Koji
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2010, 74 (06) : 356 - 364
  • [9] Microstructure and mechanical properties of rapidly solidified Al-Cr alloys
    Guofa Mi
    Yalin Mo
    Kuangfei Wang
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2009, 24 : 424 - 427
  • [10] Microstructure and mechanical properties of rapidly solidified Al-Cr alloys
    Mi Guofa
    Mo Yalin
    Wang Kuangfei
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2009, 24 (03): : 424 - 427
12345