Analysis of temperature distribution in cast-resin dry-type transformers

被引：59
作者：
Rahimpour, Ebrahim
Azizian, Davood
机构：
[1] Univ Zanjan, Dept Elect Engn, Fac Engn, Zanjan, Iran
[2] Iran Transformer Res Inst, Zanjan, Iran
来源：
ELECTRICAL ENGINEERING | 2007年 / 89卷 / 04期
关键词：
thermal modeling; dry-type transformer; cast-resin; finite difference;
D O I：
10.1007/s00202-006-0008-4
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Non-flammable characteristic of dry-type cast- resin transformers make them suitable for residential and hospital usages. However, because of resin's property, thermal behavior of these transformers is undesirable, so it is important to analyze their thermal behavior. Temperature distribution of cast-resin transformers is mathematically modeled in this paper. The solution of the model was carried out successfully by finite difference method. In order to validate the model, the simulation results were compared with the experimental data measured from an 800 kVA transformer. Finally, the influences of some construction parameters and environmental conditions on temperature distribution of cast-resin transformers were discussed.
引用
收藏
页码：301 / 309
页数：9
相关论文
共 50 条
[31]   Temperature rise prediction of a natural cooling dry-type transformer [J].
Wu, W. ;
Kern, J. A. .
SOUTHEASTCON 2016, 2016,
[32]   Design of Dry-type Transformer Temperature Controller Based on MCU [J].
Zheng, Mingze ;
Luo, Yi ;
Tang, Sanguo ;
Shang, Chunxue .
2021 INTERNATIONAL CONFERENCE ON NEURAL NETWORKS, INFORMATION AND COMMUNICATION ENGINEERING, 2021, 11933
[33]   Inter-Turn Breakdown Fault Analysis and Winding Structure Optimisation of Winding of Dry-Type Transformers in Wind Farms [J].
Pu, Ziheng ;
Yu, Xinyun ;
Wang, Yaoqiang ;
Liu, Hao ;
Feng, Zihao .
ENERGIES, 2023, 16 (04)
[34]   Winding Hottest-Spot Temperature Analysis in Dry-Type Transformer Using Numerical Simulation [J].
Mafra, Rafael Goncalves ;
Magalhaes, Elisan dos Santos ;
Salles Anselmo, Bruno de Campos ;
Belchior, Fernando Nunes ;
Marcondes Lima e Silva, Sandro Metrevelle .
ENERGIES, 2019, 12 (01)
[35]   A CAD integrated system for epoxy resin casting dry type transformers [J].
Li, T ;
Sun, P ;
Qiu, QQ ;
Wang, B ;
Li, QF .
ICEMS 2005: Proceedings of the Eighth International Conference on Electrical Machines and Systems, Vols 1-3, 2005, :2474-2477
[36]   Load capability estimation of dry-type transformers used in PV-systems by employing field measurements [J].
David L. Alvarez ;
Jorge Restrepo ;
F. Faria da Silva ;
Javier Rosero .
Electrical Engineering, 2021, 103 :1055-1065
[37]   Analysis of lightning impulse voltage distribution for a dry-type transformer using three different winding types [J].
Erdogan, Muzaffer ;
Eker, Mehmet Kubilay .
ELECTRIC POWER SYSTEMS RESEARCH, 2020, 188
[38]   Load capability estimation of dry-type transformers used in PV-systems by employing field measurements [J].
Alvarez, David L. ;
Restrepo, Jorge ;
da Silva, F. Faria ;
Rosero, Javier .
ELECTRICAL ENGINEERING, 2021, 103 (02) :1055-1065
[39]   The Temperature Variation Characteristic Analysis Based on the Electromagnetic-Thermal Coupled Method for the Dry-type Transformer [J].
Li, Na ;
Sun, Yuanyuan ;
Hu, Yiru ;
Zhang, Lina ;
Zhong, Hui ;
Wang, Erdong .
2019 22ND INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2019), 2019, :665-669
[40]   Dry-Type - vs. - Liquid-Immersed Transformers: Specification Installation and Operational Impact in a Marine Environment [J].
Wimmer, Jeffrey ;
Tanner, M. R. ;
Nunn, Tommy ;
Kern, Joel .
2011 RECORD OF CONFERENCE PAPERS INDUSTRY APPLICATIONS SOCIETY 58TH ANNUAL IEEE PETROLEUM AND CHEMICAL INDUSTRY CONFERENCE (PCIC), 2011,
12345