Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication

被引:201
作者
Spoerk, Martin [1 ]
Gonzalez-Gutierrez, Joamin [1 ]
Sapkota, Janak [1 ]
Schuschnigg, Stephan [1 ]
Holzer, Clemens [1 ]
机构
[1] Univ Leoben, Polymer Proc, Otto Gloeckel Str 2, A-8700 Leoben, Austria
关键词
Additive manufacturing; fused filament fabrication; adhesion; polylactic acid; acrylonitrile butadiene styrene; contact angle measurements; morphology; glass transition temperature; FRICTION;
D O I
10.1080/14658011.2017.1399531
中图分类号
TB33 [复合材料];
学科分类号
摘要
For parts produced by fused filament fabrication (FFF) the adhesion between the first printed layer and the printing bed is crucial, since it provides the foundation to the subsequent layers. Inadequate adhesion can result in poor printing quality or destroyed bed surfaces. This study aims at understanding and optimising the adhesion process for parts produced by FFF. The consequences of varying printing bed temperatures on the adhesion of two commonly used printing materials on two standard bed surfaces were investigated by means of an in-house built adhesion measurement device and complemented by contact angle measurements. This study shows a significant increase in adhesion forces, when printing parts at a bed temperature slightly above the glass transition temperature of the printing material.
引用
收藏
页码:17 / 24
页数:8
相关论文
共 18 条
[1]   Adhesion of polymers [J].
Awaja, Firas ;
Gilbert, Michael ;
Kelly, Georgina ;
Fox, Bronwyn ;
Pigram, Paul J. .
PROGRESS IN POLYMER SCIENCE, 2009, 34 (09) :948-968
[2]   A study on the role of wetting parameters on friction in injection moulding [J].
Berger, Gerald R. ;
Steffel, Clemens ;
Friesenbichler, Walter .
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2016, 52 (1-2) :193-211
[3]   Fused deposition modeling with polypropylene [J].
Carneiro, O. S. ;
Silva, A. F. ;
Gomes, R. .
MATERIALS & DESIGN, 2015, 83 :768-776
[4]   Adhesion and components of solid surface energies [J].
Clint, JH .
CURRENT OPINION IN COLLOID & INTERFACE SCIENCE, 2001, 6 (01) :28-33
[5]   Interface and chain confinement effects on the glass transition temperature of thin polymer films [J].
Forrest, JA ;
DalnokiVeress, K ;
Dutcher, JR .
PHYSICAL REVIEW E, 1997, 56 (05) :5705-5716
[6]   Simplified fabrication of integrated microfluidic devices using fused deposition modeling 3D printing [J].
Gaal, Gabriel ;
Mendes, Melissa ;
de Almeida, Tiago P. ;
Piazzetta, Maria H. O. ;
Gobbi, Angelo L. ;
Riul, Antonio, Jr. ;
Rodrigues, Varlei .
SENSORS AND ACTUATORS B-CHEMICAL, 2017, 242 :35-40
[7]  
Gibson I., 2016, Additive Manufacturing Technologies 3d Printing, Rapid Prototyping, and Direct Digital Manufacturing, V2nd
[8]  
Gonzalez-Gutierrez J., 2017, ANTEC AN 2017 PLAST
[9]  
JABBARI E, 1994, J MACROMOL SCI R M C, VC34, P205
[10]   Effects of Temperature on the Microscale Adhesion Behavior of Thermoplastic Polymer Film [J].
Kim, Kwang-Seop ;
Heo, Jung-Chul ;
Kim, Kyung-Woong .
TRIBOLOGY LETTERS, 2010, 38 (02) :97-106