Modeling of Differential Line Referenced to a Meshed Ground Plane

被引：0
|
作者：
Xiao, Fengchao [1 ]
Murano, Kimitoshi [2 ]
Kami, Yoshio [1 ]
机构：
[1] Univ Electrocommun, Dept Commun Engn & Informat, Chofu, Tokyo 1828585, Japan
[2] Tokai Univ, Dept Elect & Elect Engn, Hiratsuka, Kanagawa 2591292, Japan
来源：
2014 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC EUROPE) | 2014年
关键词：
Meshed ground plane; diffeential line; crosstalk; equivalent model; multiconductor transmission line; PERFORATED REFERENCE PLANES; TRANSMISSION-LINES;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Meshed power and ground planes are quite common in flexible printed circuit board (PCB) and also found primarily in the multi-layered low temperature co-fired ceramic substrate. Transmission characteristics of a differential line referenced to a meshed ground plane is investigated in this work. The ABCD parameters for the differential line referenced to a meshed ground plane are described and an equivalent transmission line model in terms of the effective mode characteristic impedances and the effective mode propagation constants is proposed. The validity of the approach is confirmed through comparison with different test examples.
引用
收藏
页码：735 / 740
页数：6
相关论文
共 50 条
  • [1] Modeling and Analysis of a Trace Referenced to a Meshed Ground Plane
    Wu, Songping
    Shi, Hao
    Herndon, Matthew
    Cornelius, Bill
    Halligan, Matt
    Fan, Jun
    2011 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC), 2011, : 137 - 141
  • [2] Extracting Characteristic Impedance of a Transmission Line Referenced to a Meshed Ground Plane
    He, Jiayi
    Hwang, Chulsoon
    Pan, Jingnan
    Cho, Gyu-Yeong
    Bae, Bumhee
    Park, Hark-Byeong
    Fan, Jun
    2016 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC), 2016, : 651 - 656
  • [3] Flexible Printed Circuit Meshed Ground Plane Modeling Methodology
    Sreerama, Chaitanya
    Hall, Stephen H.
    Gantner, Eric
    2017 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY & SIGNAL/POWER INTEGRITY (EMCSI), 2017,
  • [4] Characterization of a Microstrip Line Referenced to a Meshed Return Plane Using 2-D Analysis
    Sun, Ze
    Liu, Jian
    Xiong, Xiaoyan
    Kim, DongHyun
    Beetner, Daryl
    Khilkevich, Victor
    IEEE Transactions on Signal and Power Integrity, 2024, 3 : 13 - 20
  • [5] Meshed ground plane structures for textile antennas
    Maleszka, Tomasz
    Preisner, Michal
    Kabacik, Pawel
    2009 3RD EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION, VOLS 1-6, 2009, : 666 - 670
  • [6] Multi-Objective Design of Transmission Line Referenced to Meshed Ground Planes by Preference Set-based Design
    Matsuishi, Koki
    Kayano, Yoshiki
    Xiao, Fengchao
    Kami, Yoshio
    2019 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC EUROPE 2019), 2019, : 486 - 491
  • [7] Modeling of Differential Line Across a Ground Slot
    Xiao, Fengchao
    Kami, Yoshio
    2014 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, TOKYO (EMC'14/TOKYO), 2014, : 322 - 325
  • [8] Differential-skew Mitigation by Rotating Meshed Ground
    Wang, Chenyu
    Iokibe, Kengo
    Toyota, Yoshitaka
    2018 JOINT IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY AND 2018 IEEE ASIA-PACIFIC SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC/APEMC), 2018, : 31 - 31
  • [9] Modeling ground plane cuts using transmission line theory
    Tuncer, E
    Lam, CW
    Yuan, FY
    ELECTRICAL PERFORMANCE OF ELECTRONIC PACKAGING - IEEE 5TH TOPICAL MEETING, 1996, : 229 - 231
  • [10] Propagation Characteristics and Modeling of Meshed Ground Coplanar Waveguide
    Rojas-Nastrucci, Eduardo A.
    Snider, Arthur David
    Weller, Thomas M.
    IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2016, 64 (11) : 3460 - 3468
12345