Study on Rational Width of Entry Protection Coal-pillar in Large Mining Height Working Face

被引：0

作者：

Wang, Xufeng ^{[1
]}

Zhang, Dongsheng ^{[1
]}

Cui, Tingfeng ^{[2
]}

Wang, Jinliang ^{[1
]}

Zhang, Wei ^{[1
]}

机构：

[1] China Univ Min & Technol, Sch Mines, State Key Lab Coal Resources & Safe Min, Xuzhou 221116, Jiangsu, Peoples R China

[2] Xuzhou Inst Architectural Technol, Xuzhou 221116, Jiangsu, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING APPLICATION II | 2012年 / 413卷

基金：

中国国家自然科学基金;

关键词：

large mining height; mining roadway; coal-pillar width;

D O I：

10.4028/www.scientific.net/AMR.413.404

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper demonstrates the attempt to identify a reasonable chain pillar width in the condition of large mining height, along with a case study at the gateway of No.1103 panel with large mining height in Suancigou Mine. Theoretical calculation and numerical simulation were employed as the main approaches during the research to figure out the rational width of entry protection coal-pillar, which was then proved to be capable for engineering practice. The results that derived from our research can offer technical support for spot production, and serve as references for future investigation upon chain pillar design under large mining height.

引用

页码：404 / +

页数：2

共 50 条

[41] Study on rational width of protective coal pillar for district dip in rock burst mine
Liu J.
Zheng X.
Liu H.
Wang Y.
Lu X.
Wang W.
Meitan Kexue Jishu/Coal Science and Technology (Peking), 2021, 49 (02): : 52 - 60
[42] Key Stratum Structure and Support Working Resistance of Longwall Face with Large Mining Height in the Shallow Coal Seams, China
Huang, Qingxiang
Zhou, Jinlong
Cao, Jian
ADVANCES IN CIVIL ENGINEERING, 2020, 2020
[43] Study on effect of dip angle on coal wall spalling of working face with great mining height in steeply inclined coal seam
Wang H.
Wu Y.
Jiao J.
Luo S.
Liu K.
Xie P.
Liu M.
Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2019, 36 (04): : 728 - 735and752
[44] Determination of the width of protection coal pillar under inclined shaft with segment structure affected by mining action
Qi, Yi
Liu, Baoguo
Wang, Yan
Electronic Journal of Geotechnical Engineering, 2015, 20 (24): : 11923 - 11934
[45] Study on the Bearing Capacity of Coal Pillar Protecting Roadway in Deep Mining Face
Wu, Shiliang
Yang, Shunqiang
DEVELOPMENT AND PROTECTION OF MINERAL RESOURCES, 2025, : 181 - 188
[46] Analysis of the Protection Performance of Face Guard for Large Mining Height Hydraulic Support
Wan, Lirong
Zhang, Shuai
Meng, Zhaosheng
Xie, Yunyue
SHOCK AND VIBRATION, 2021, 2021
[47] Technical parameters of drawing and coal-gangue field movements of a fully mechanized large mining height top coal caving working face
LIU Chang-you
International Journal of Mining Science and Technology, 2009, 19 (05) : 549 - 555
[48] Study on the width of the non-elastic zone in inclined coal pillar for strip mining
Wei, Gao
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2014, 72 : 304 - 310
[49] Technical parameters of drawing and coal-gangue field movements of a fully mechanized large mining height top coal caving working face
LIU Changyou HUANG Bingxiang WU Fengfeng School of Mines State Key Laboratory for Coal Resources and Safe Mining China University of Mining Technology Xuzhou Jiangsu China
MiningScienceandTechnology, 2009, 19 (05) : 549 - 555
[50] Study on the Migration Law of Overlying Strata on the Working Surface of Large Mining Height in YCW Coal Mine
Liu, Hongtao
Huo, Tianhong
Liu, Yang
Han, Zhou
Han, Zijun
Liang, Wanliang
GEOFLUIDS, 2022, 2022

← 1 2 3 4 5 →